Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 1234]

▼NMoreMountains
►NFeedbacks
CBlinkPhase	Describes a blink phase, defined by a duration for the phase, and the time it should remain inactive and active, sequentially For the duration of the phase, the object will be off for OffDuration, then on for OnDuration, then off again for OffDuration, etc If you want a grenade to blink briefly every .2 seconds, for 1 second, these parameters are what you're after : PhaseDuration = 1f; OffDuration = 0.2f; OnDuration = 0.1f;
CDemoBall	A class handling the lifecycle of the balls included in the MMFeedbacks demo It waits for 2 seconds after the spawn of the ball, and destroys it, playing a MMFeedbacks while it does so
CDemoButton	A simple class used to handle demo buttons in the MMF_PlayerDemo and MMFeedbacksDemo scenes
CDemoGhost	A class used on the MMFeedback's demo ghost
CDemoPackageTester	This class, meant to be used in MMFeedbacks demos, will check for requirements, and output an error message if necessary
CFeedbackHelpAttribute	Atttribute used to mark feedback class. The contents allow you to specify a help text for each feedback
CFeedbackPathAttribute	Atttribute used to mark feedback class. The provided path is used to sort the feedback list displayed in the feedback manager dropdown
CInternalWiggleProperties	A struct used to store internal wiggle properties
CMMAudioFilterDistortionShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterDistortionShaker	Add this to an audio distortion filter to shake its values remapped along a curve
CMMAudioFilterEchoShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterEchoShaker	Add this to an audio echo filter to shake its values remapped along a curve
CMMAudioFilterHighPassShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterHighPassShaker	Add this to an audio high pass filter to shake its values remapped along a curve
CMMAudioFilterLowPassShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterLowPassShaker	Add this to an audio distortion low pass to shake its values remapped along a curve
CMMAudioFilterReverbShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterReverbShaker	Add this to an audio reverb filter to shake its values remapped along a curve
CMMAudioSourcePitchShakeEvent	An event used to trigger vignette shakes
CMMAudioSourcePitchShaker	Add this to an AudioSource to shake its pitch remapped along a curve
CMMAudioSourceSequencer	A MMSequencer with ready made slots to play AudioSources
CMMAudioSourceStereoPanShakeEvent	An event used to trigger vignette shakes
CMMAudioSourceStereoPanShaker	Add this to an AudioSource to shake its stereo pan values remapped along a curve
CMMAudioSourceVolumeShakeEvent	An event used to trigger vignette shakes
CMMAudioSourceVolumeShaker	Add this to an AudioSource to shake its volume remapped along a curve
CMMBlink	Add this class to a GameObject to make it blink, either by enabling/disabling a gameobject, changing its alpha, emission intensity, or a value on a shader)
CMMCameraClippingPlanesShakeEvent	An event used to trigger vignette shakes
CMMCameraClippingPlanesShaker	Add this to a camera and it'll let you control its near and far clipping planes
CMMCameraFieldOfViewShakeEvent	An event used to trigger vignette shakes
CMMCameraFieldOfViewShaker	Add this to a camera and it'll let you control its field of view over time, can be piloted by a MMFeedbackCameraFieldOfView
CMMCameraOrthographicSizeShakeEvent	An event used to trigger vignette shakes
CMMCameraOrthographicSizeShaker	Add this to a camera and it'll let you control its orthographic size over time, can be piloted by a MMFeedbackCameraOrthographicSize
CMMCameraShakeEvent
CMMCameraShakeProperties	Camera shake properties
CMMCameraShaker	A class to add to your camera. It'll listen to MMCameraShakeEvents and will shake your camera accordingly
CMMCameraShakerRotation	A variant of the Camera Shaker that acts on the rotation instead of the position. Careful, can cause vertigo to some users
CMMCameraShakeStopEvent
CMMCameraZoomEvent
CMMChannel	A scriptable object you can create assets from, to identify Channels, used mostly (but not only) in feedbacks and shakers, to determine a channel of communication, usually between emitters and receivers
CMMChannelData	A data structure used to pass channel information
CMMF_Animation	A feedback used to trigger an animation (bool, int, float or trigger) on the associated animator, with or without randomness
CMMF_AnimatorSpeed	This feedback will let you change the speed of a target animator, either once, or instantly and then reset it, or interpolate it over time
CMMF_AudioFilterDistortion	This feedback lets you control the distortion level of a distortion filter. You'll need a MMAudioFilterDistortionShaker on the filter
CMMF_AudioFilterEcho	This feedback lets you control the wetmix level of an echo filter. You'll need a MMAudioFilterEchoShaker on your filter
CMMF_AudioFilterHighPass	This feedback lets you control the cutoff frequency of a high pass filter. You'll need a MMAudioFilterHighPassShaker on your filter
CMMF_AudioFilterLowPass	This feedback lets you control the cutoff frequency of a low pass filter. You'll need a MMAudioFilterLowPassShaker on your filter
CMMF_AudioFilterReverb	This feedback lets you control the reverb level of a reverb filter. You'll need a MMAudioFilterReverbShaker on your filter
CMMF_AudioMixerSnapshotTransition	This feedback will let you transition to a target AudioMixer Snapshot over a specified time
CMMF_AudioSource
CMMF_AudioSourcePitch	This feedback lets you control the pitch of an AudioSource over time
CMMF_AudioSourceStereoPan	This feedback lets you control the stereo pan of a target AudioSource over time
CMMF_AudioSourceVolume	This feedback lets you control the volume of a target AudioSource over time
CMMF_Blink	This feedback will trigger a MMBlink object, letting you blink something
CMMF_Broadcast	This feedback lets you broadcast a float value to the MMRadio system
CMMF_BroadcastProxy	This component will be automatically added by the MMF_Broadcast feedback
CMMF_Button
CMMF_CameraClippingPlanes	This feedback lets you control a camera's clipping planes over time. You'll need a MMCameraClippingPlanesShaker on your camera
CMMF_CameraFieldOfView	This feedback lets you control a camera's field of view over time. You'll need a MMCameraFieldOfViewShaker on your camera
CMMF_CameraOrthographicSize	This feedback lets you control a camera's orthographic size over time. You'll need a MMCameraOrthographicSizeShaker on your camera
CMMF_CameraShake	This feedback will send a shake event when played
CMMF_CameraZoom	A feedback that will allow you to change the zoom of a (3D) camera when played
CMMF_CanvasGroup	This feedback lets you control the opacity of a canvas group over time
CMMF_CanvasGroupBlocksRaycasts	This feedback will let you turn the BlocksRaycast parameter of a target CanvasGroup on or off on play
CMMF_Collider	This feedback will let you enable/disable/toggle a target collider, or change its trigger status
CMMF_Collider2D	This feedback will let you enable/disable/toggle a target collider 2D, or change its trigger status
CMMF_DebugComment	This feedback doesn't do anything by default, it's just meant as a comment, you can store text in it for future reference, maybe to remember how you setup a particular MMFeedbacks. Optionally it can also output that comment to the console on Play
CMMF_DebugLBreak	This feedback will force a break, pausing the editor
CMMF_DebugLog	This feedback will let you output a message to the console, using a custom MM debug method, or Log, Assertion, Error or Warning logs
CMMF_DestinationTransform	This feedback will let you animate the position/rotation/scale of a target transform to match the one of a destination transform
CMMF_Destroy	This feedback allows you to destroy a target gameobject, either via Destroy, DestroyImmediate, or SetActive:False
CMMF_Enable	Turns an object active or inactive at the various stages of the feedback
CMMF_Events	A feedback to bind Unity events to and trigger them when played
CMMF_Fade	This feedback will trigger a one time play on a target FloatController
CMMF_Feedback
CMMF_FeedbackBase
CMMF_FeedbackBaseTarget
CMMF_FeedbackInspector
CMMF_Feedbacks	This feedback allows you to trigger a target MMFeedbacks, or any MMFeedbacks on the specified Channel within a certain range. You'll need an MMFeedbacksShaker on them
CMMF_Flash	This feedback will trigger a flash event (to be caught by a MMFlash) when played
CMMF_Flicker	This feedback will make the bound renderer flicker for the set duration when played (and restore its initial color when stopped)
CMMF_FloatController	This feedback will trigger a one time play on a target FloatController
CMMF_FloatingText	This feedback will request the spawn of a floating text, usually to signify damage, but not necessarily This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own. Using that feedback will always spawn the same text. While this may be what you want, if you're using the Corgi Engine or TopDown Engine, you'll find dedicated versions directly hooked to the Health component, letting you display damage taken
CMMF_Fog	This feedback will let you animate the density, color, end and start distance of your scene's fog
CMMF_FreezeFrame	This feedback will trigger a freeze frame event when played, pausing the game for the specified duration (usually short, but not necessarily)
CMMF_Graphic	This feedback will let you change the color of a target Graphic over time
CMMF_GraphicCrossFade	This feedback will let you trigger cross fades on a target Graphic
CMMF_HoldingPause	this feedback will "hold", or wait, until all previous feedbacks have been executed, and will then pause the execution of your MMFeedbacks sequence, for the specified duration
CMMF_Image	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers
CMMF_ImageAlpha	This feedback will let you change the alpha of a target sprite renderer over time
CMMF_ImageFill	This feedback will let you change the fill value of a target Image over time
CMMF_ImageRaycastTarget	This feedback will let you control the RaycastTarget parameter of a target image, turning it on or off on play
CMMF_ImageTextureOffset	This feedback will let you control the texture offset of a target UI Image over time
CMMF_ImageTextureScale	This feedback will let you control the texture scale of a target UI Image over time
CMMF_InstantiateObject	This feedback will instantiate the associated object (usually a VFX, but not necessarily), optionnally creating an object pool of them for performance
CMMF_Light	This feedback will let you control the color and intensity of a Light when played
CMMF_LoadScene	This feedback will request the load of a new scene, using the method of your choice
CMMF_LookAt	This feedback will let you animate the rotation of a transform to look at a target over time. You can also use it to broadcast a MMLookAtShake event, that MMLookAtShakers on the right channel will be able to listen for and act upon
CMMF_Looper	This feedback will move the current "head" of an MMFeedbacks sequence back to another feedback above in the list. What feedback the head lands on depends on your settings : you can decide to have it loop at last pause, or at the last LoopStart feedback in the list (or both). Furthermore, you can decide to have it loop multiple times and cause a pause when met
CMMF_LooperStart	This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both
CMMF_Material
CMMF_MMGameEvent	This feedback will trigger a MMGameEvent of the specified name when played
CMMF_MMSoundManagerAllSoundsControl	A feedback used to control all sounds playing on the MMSoundManager at once. It'll let you pause, play, stop and free (stop and returns the audiosource to the pool) sounds. You will need a MMSoundManager in your scene for this to work
CMMF_MMSoundManagerSaveLoad	This feedback will let you trigger save, load, and reset on MMSoundManager settings. You will need a MMSoundManager in your scene for this to work
CMMF_MMSoundManagerSound	This feedback will let you play a sound via the MMSoundManager. You will need a game object in your scene with a MMSoundManager object on it for this to work
CMMF_MMSoundManagerSoundControl	This feedback will let you control a specific sound (or sounds), targeted by SoundID, which has to match the SoundID of the sound you intially played. You will need a MMSoundManager in your scene for this to work
CMMF_MMSoundManagerSoundData	A scriptable object used to store data for MMSoundManager play
CMMF_MMSoundManagerSoundFade	This feedback lets you trigger fades on a specific sound via the MMSoundManager. You will need a MMSoundManager in your scene for this to work
CMMF_MMSoundManagerTrackControl	This feedback will let you control all sounds playing on a specific track (master, UI, music, sfx), and play, pause, mute, unmute, resume, stop, free them all at once. You will need a MMSoundManager in your scene for this to work
CMMF_MMSoundManagerTrackFade	This feedback will let you fade all the sounds on a specific track at once. You will need a MMSoundManager in your scene for this to work
CMMF_Particles	This feedback will play the associated particles system on play, and stop it on stop
CMMF_ParticlesInstantiation	This feedback will instantiate a particle system and play/stop it when playing/stopping the feedback
CMMF_Pause	This feedback will cause a pause when met, preventing any other feedback lower in the sequence to run until it's complete
CMMF_Player
►CMMF_PlayerChain	This feedback allows you to chain any number of target MMF Players and play them in sequence, with optional delays before and after
CPlayerChainItem	A class used to store and define items in a chain of MMF Players
CMMF_PlayerConfiguration	An asset to store copy information, as well as global feedback settings. It requires that one (and only one) MMFeedbacksConfiguration asset be created and stored in a Resources folder. That's already done when installing MMFeedbacks
CMMF_PlayerControl	This feedback allows you to control one or more target MMF Players
►CMMF_PlayerEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CFeedbackTypePair	A data structure to store types and names
CMMF_PlayerEnabler	A helper class added automatically by MMFeedbacks if they're in AutoPlayOnEnable mode This lets them play again should their parent game object be disabled/enabled
CMMF_PlayerEvent	Events triggered by a MMFeedbacks when playing a series of feedbacks
CMMF_PlayerEvents	A subclass of MMFeedbacks, contains UnityEvents that can be played,
CMMF_Playlist	This feedback will let you pilot a MMPlaylist
CMMF_Position	this feedback will let you animate the position of
CMMF_PositionShake	This feedback lets you emit a PositionShake event. This will be caught by MMPositionShakers (on the specified channel). Position shakers, as the name suggests, are used to shake the position of a transform, along a direction, with optional noise and other fine control options
CMMF_PPMovingFilter	This feedback will trigger a post processing moving filter event, meant to be caught by a MMPostProcessingMovableFilter object
CMMF_Property	This feedback will let you target (almost) any property, on any object in your scene. It also works on scriptable objects. Drag an object, select a property, and setup your feedback " + to update that property over time
CMMF_RadioSignal	This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier
CMMF_RectTransformAnchor	This feedback lets you control the min and max anchors of a RectTransform over time. That's the normalized position in the parent RectTransform that the lower left and upper right corners are anchored to
CMMF_RectTransformOffset	This feedback lets you control the offset of the lower left corner of the rectangle relative to the lower left anchor, and the offset of the upper right corner of the rectangle relative to the upper right anchor
CMMF_RectTransformPivot	This feedback lets you control the position of a RectTransform's pivot over time
CMMF_RectTransformSizeDelta	This feedback lets you control the size delta property (the size of this RectTransform relative to the distances between the anchors) of a RectTransform, over time
CMMF_ReferenceHolder	This feedback allows you to hold a reference, that can then be used by other feedbacks to automatically set their target. It doesn't do anything when played
CMMF_Rigidbody	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMF_Rigidbody2D	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMF_RotatePositionAround	This feedback will animate the target's position (not its rotation), on an arc around the specified rotation center, for the specified duration (in seconds)
CMMF_Rotation	This feedback animates the rotation of the specified object when played
CMMF_RotationShake	This feedback lets you emit a RotationShake event. This will be caught by MMRotationShakers (on the specified channel). Rotation shakers, as the name suggests, are used to shake the rotation of a transform, along a direction, with optional noise and other fine control options
CMMF_Scale	This feedback will animate the scale of the target object over time when played
CMMF_ScaleShake	This feedback lets you emit a ScaleShake event. This will be caught by MMScaleShakers (on the specified channel). Scale shakers, as the name suggests, are used to shake the scale of a transform, along a direction, with optional noise and other fine control options
CMMF_SetActive	Turns an object active or inactive at the various stages of the feedback
CMMF_SetParent	A feedback used to change the parent of a transform
CMMF_ShaderController	This feedback will let you control values on a target ShaderController, letting you modify the behaviour and aspect of a shader driven material at runtime
CMMF_ShaderGlobal	Turns an object active or inactive at the various stages of the feedback
CMMF_Skybox	This feedback will let you change the scene's skybox on play, replacing it with another one, either a specific one, or one picked at random among multiple skyboxes
CMMF_Sound
CMMF_SpriteRenderer	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers
CMMF_SquashAndStretch	This feedback will let you modify the scale of an object on an axis while the other two axis (or only one) get automatically modified to conserve mass
CMMF_Text	This feedback lets you control the contents of a target Text over time
CMMF_TextColor	This feedback lets you control the color of a target Text over time
CMMF_TextFontSize	This feedback lets you control the font size of a target Text over time
CMMF_TextureOffset	This feedback will let you control the texture offset of a target material over time
CMMF_TextureScale	This feedback will let you control the texture scale of a target material over time
CMMF_TimescaleModifier	This feedback changes the timescale by sending a TimeScale event on play
CMMF_TMPAlpha	This feedback lets you control the alpha of a target TMP over time
CMMF_TMPCharacterSpacing	This feedback lets you control the character spacing of a target TMP over time
CMMF_TMPColor	This feedback lets you control the color of a target TMP over time
CMMF_TMPCountTo	This feedback will let you update a TMP text value over time, with a value going from A to B over time, on a curve
CMMF_TMPDilate	This feedback lets you dilate a TMP text over time
CMMF_TMPFontSize	This feedback lets you control the font size of a target TMP over time
CMMF_TMPLineSpacing	This feedback lets you control the line spacing of a target TMP over time
CMMF_TMPOutlineColor	This feedback lets you control the color of a target TMP's outline over time
CMMF_TMPOutlineWidth	This feedback lets you control the outline width of a target TMP over time
CMMF_TMPParagraphSpacing	This feedback lets you control the paragraph spacing of a target TMP over time
CMMF_TMPSoftness	This feedback lets you tweak the softness of a TMP text over time
CMMF_TMPText	This feedback will let you change the text of a target TMP text component
CMMF_TMPTextReveal	This feedback will let you reveal words, lines, or characters in a target TMP, one at a time
CMMF_TMPWordSpacing	This feedback lets you control the word spacing of a target TMP over time
CMMF_UnloadScene	This feedback lets you unload a scene by name or build index
CMMF_VideoPlayer	This feedback lets you control video players in all sorts of ways (Play, Pause, Toggle, Stop, Prepare, StepForward, StepBackward, SetPlaybackSpeed, SetDirectAudioVolume, SetDirectAudioMute, GoToFrame, ToggleLoop)
CMMF_Wiggle	When played, this feedback will activate the Wiggle method of a MMWiggle object based on the selected settings, wiggling either its position, rotation, scale, or all of these
CMMFConditionAttribute
CMMFConditionAttributeDrawer
CMMFeedback	A base class, meant to be extended, defining a Feedback. A Feedback is an action triggered by a MMFeedbacks, usually in reaction to the player's input or actions, to help communicate both emotion and legibility, improving game feel. To create a new feedback, extend this class and override its Custom methods, declared at the end of this class. You can look at the many examples for reference
CMMFeedbackAnimation	A feedback used to trigger an animation (bool, int, float or trigger) on the associated animator, with or without randomness
CMMFeedbackAnimatorSpeed	This feedback will let you change the speed of a target animator, either once, or instantly and then reset it, or interpolate it over time
CMMFeedbackAudioFilterDistortion	This feedback lets you control the distortion level of a distortion filter. You'll need a MMAudioFilterDistortionShaker on the filter
CMMFeedbackAudioFilterEcho	This feedback lets you control the wetmix level of an echo filter. You'll need a MMAudioFilterEchoShaker on your filter
CMMFeedbackAudioFilterHighPass	This feedback lets you control the cutoff frequency of a high pass filter. You'll need a MMAudioFilterHighPassShaker on your filter
CMMFeedbackAudioFilterLowPass	This feedback lets you control the cutoff frequency of a low pass filter. You'll need a MMAudioFilterLowPassShaker on your filter
CMMFeedbackAudioFilterReverb	This feedback lets you control the reverb level of a reverb filter. You'll need a MMAudioFilterReverbShaker on your filter
CMMFeedbackAudioMixerSnapshotTransition	This feedback will let you transition to a target AudioMixer Snapshot over a specified time
CMMFeedbackAudioSource
CMMFeedbackAudioSourcePitch	This feedback lets you control the pitch of an AudioSource over time
CMMFeedbackAudioSourceStereoPan	This feedback lets you control the stereo pan of a target AudioSource over time
CMMFeedbackAudioSourceVolume	This feedback lets you control the volume of a target AudioSource over time
CMMFeedbackBase
CMMFeedbackBaseTarget
CMMFeedbackBlink	This feedback will trigger a MMBlink object, letting you blink something
CMMFeedbackBroadcast	This feedback lets you broadcast a float value to the MMRadio system
CMMFeedbackCameraClippingPlanes	This feedback lets you control a camera's clipping planes over time. You'll need a MMCameraClippingPlanesShaker on your camera
CMMFeedbackCameraFieldOfView	This feedback lets you control a camera's field of view over time. You'll need a MMCameraFieldOfViewShaker on your camera
CMMFeedbackCameraOrthographicSize	This feedback lets you control a camera's orthographic size over time. You'll need a MMCameraOrthographicSizeShaker on your camera
CMMFeedbackCameraShake	This feedback will send a shake event when played
CMMFeedbackCameraZoom	A feedback that will allow you to change the zoom of a (3D) camera when played
CMMFeedbackCanvasGroup	This feedback lets you control the opacity of a canvas group over time
CMMFeedbackCanvasGroupBlocksRaycasts	This feedback will let you turn the BlocksRaycast parameter of a target CanvasGroup on or off on play
CMMFeedbackCollider	This feedback will let you enable/disable/toggle a target collider, or change its trigger status
CMMFeedbackCollider2D	This feedback will let you enable/disable/toggle a target collider 2D, or change its trigger status
CMMFeedbackDebugComment	This feedback doesn't do anything by default, it's just meant as a comment, you can store text in it for future reference, maybe to remember how you setup a particular MMFeedbacks. Optionally it can also output that comment to the console on Play
CMMFeedbackDebugLog	This feedback will let you output a message to the console, using a custom MM debug method, or Log, Assertion, Error or Warning logs
CMMFeedbackDestinationTransform	This feedback will let you animate the position/rotation/scale of a target transform to match the one of a destination transform
CMMFeedbackDestroy	This feedback allows you to destroy a target gameobject, either via Destroy, DestroyImmediate, or SetActive:False
CMMFeedbackEnable	Turns an object active or inactive at the various stages of the feedback
CMMFeedbackEvents	A feedback to bind Unity events to and trigger them when played
CMMFeedbackFade	This feedback will trigger a one time play on a target FloatController
CMMFeedbackFeedbacks	Turns an object active or inactive at the various stages of the feedback
CMMFeedbackFlash	This feedback will trigger a flash event (to be caught by a MMFlash) when played
CMMFeedbackFlicker	This feedback will make the bound renderer flicker for the set duration when played (and restore its initial color when stopped)
CMMFeedbackFloatController	This feedback will trigger a one time play on a target FloatController
CMMFeedbackFloatingText	This feedback will request the spawn of a floating text, usually to signify damage, but not necessarily This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own. Using that feedback will always spawn the same text. While this may be what you want, if you're using the Corgi Engine or TopDown Engine, you'll find dedicated versions directly hooked to the Health component, letting you display damage taken
CMMFeedbackFog	This feedback will let you animate the density, color, end and start distance of your scene's fog
CMMFeedbackFreezeFrame	This feedback will trigger a freeze frame event when played, pausing the game for the specified duration (usually short, but not necessarily)
CMMFeedbackHoldingPause	this feedback will "hold", or wait, until all previous feedbacks have been executed, and will then pause the execution of your MMFeedbacks sequence, for the specified duration
CMMFeedbackImage	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers
CMMFeedbackImageAlpha	This feedback will let you change the alpha of a target sprite renderer over time
CMMFeedbackImageRaycastTarget	This feedback will let you control the RaycastTarget parameter of a target image, turning it on or off on play
CMMFeedbackInstantiateObject	This feedback will instantiate the associated object (usually a VFX, but not necessarily), optionnally creating an object pool of them for performance
CMMFeedbackLight	This feedback will let you control the color and intensity of a Light when played
CMMFeedbackLoadScene	This feedback will request the load of a new scene, using the method of your choice
CMMFeedbackLooper	This feedback will move the current "head" of an MMFeedbacks sequence back to another feedback above in the list. What feedback the head lands on depends on your settings : you can decide to have it loop at last pause, or at the last LoopStart feedback in the list (or both). Furthermore, you can decide to have it loop multiple times and cause a pause when met
CMMFeedbackLooperStart	This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both
CMMFeedbackMaterial
CMMFeedbackMMGameEvent	This feedback will trigger a MMGameEvent of the specified name when played
CMMFeedbackMMSoundManagerAllSoundsControl	A feedback used to control all sounds playing on the MMSoundManager at once. It'll let you pause, play, stop and free (stop and returns the audiosource to the pool) sounds. You will need a MMSoundManager in your scene for this to work
CMMFeedbackMMSoundManagerSaveLoad	This feedback will let you trigger save, load, and reset on MMSoundManager settings. You will need a MMSoundManager in your scene for this to work
CMMFeedbackMMSoundManagerSound	This feedback will let you play a sound via the MMSoundManager. You will need a game object in your scene with a MMSoundManager object on it for this to work
CMMFeedbackMMSoundManagerSoundControl	This feedback will let you control a specific sound (or sounds), targeted by SoundID, which has to match the SoundID of the sound you intially played. You will need a MMSoundManager in your scene for this to work
CMMFeedbackMMSoundManagerSoundFade	This feedback lets you trigger fades on a specific sound via the MMSoundManager. You will need a MMSoundManager in your scene for this to work
CMMFeedbackMMSoundManagerTrackControl	This feedback will let you control all sounds playing on a specific track (master, UI, music, sfx), and play, pause, mute, unmute, resume, stop, free them all at once. You will need a MMSoundManager in your scene for this to work
CMMFeedbackMMSoundManagerTrackFade	This feedback will let you fade all the sounds on a specific track at once. You will need a MMSoundManager in your scene for this to work
CMMFeedbackParticles	This feedback will play the associated particles system on play, and stop it on stop
CMMFeedbackParticlesInstantiation	This feedback will instantiate a particle system and play/stop it when playing/stopping the feedback
CMMFeedbackPause	This feedback will cause a pause when met, preventing any other feedback lower in the sequence to run until it's complete
CMMFeedbackPlaylist	This feedback will let you pilot a MMPlaylist
CMMFeedbackPosition	this feedback will let you animate the position of
CMMFeedbackPPMovingFilter	This feedback will trigger a post processing moving filter event, meant to be caught by a MMPostProcessingMovableFilter object
CMMFeedbackProperty	This feedback will let you target (almost) any property, on any object in your scene. It also works on scriptable objects. Drag an object, select a property, and setup your feedback " + to update that property over time
CMMFeedbackRadioSignal	This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier
CMMFeedbackRectTransformAnchor	This feedback lets you control the min and max anchors of a RectTransform over time. That's the normalized position in the parent RectTransform that the lower left and upper right corners are anchored to
CMMFeedbackRectTransformOffset	This feedback lets you control the offset of the lower left corner of the rectangle relative to the lower left anchor, and the offset of the upper right corner of the rectangle relative to the upper right anchor
CMMFeedbackRectTransformPivot	This feedback lets you control the position of a RectTransform's pivot over time
CMMFeedbackRectTransformSizeDelta	This feedback lets you control the size delta property (the size of this RectTransform relative to the distances between the anchors) of a RectTransform, over time
CMMFeedbackRigidbody	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMFeedbackRigidbody2D	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMFeedbackRotation	This feedback animates the rotation of the specified object when played
CMMFeedbacks	A collection of MMFeedback, meant to be played altogether. This class provides a custom inspector to add and customize feedbacks, and public methods to trigger them, stop them, etc. You can either use it on its own, or bind it from another class and trigger it from there
CMMFeedbacksAuthorizations	Add this class to an empty object in your scene and it will prevent any unchecked feedback in its inspector from playing
CMMFeedbackScale	This feedback will animate the scale of the target object over time when played
CMMFeedbacksConfiguration	An asset to store copy information, as well as global feedback settings. It requires that one (and only one) MMFeedbacksConfiguration asset be created and stored in a Resources folder. That's already done when installing MMFeedbacks
►CMMFeedbacksEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CFeedbackTypePair	A data structure to store types and names
CMMFeedbacksEnabler	A helper class added automatically by MMFeedbacks if they're in AutoPlayOnEnable mode This lets them play again should their parent game object be disabled/enabled
CMMFeedbackSetActive	Turns an object active or inactive at the various stages of the feedback
CMMFeedbacksEvent	Events triggered by a MMFeedbacks when playing a series of feedbacks
CMMFeedbacksEvents	A subclass of MMFeedbacks, contains UnityEvents that can be played,
CMMFeedbackShaderController	This feedback will let you control values on a target ShaderController, letting you modify the behaviour and aspect of a shader driven material at runtime
CMMFeedbackShaderGlobal	Turns an object active or inactive at the various stages of the feedback
CMMFeedbacksHelpers
CMMFeedbacksInspectorColors
CMMFeedbackSkybox	This feedback will let you change the scene's skybox on play, replacing it with another one, either a specific one, or one picked at random among multiple skyboxes
CMMFeedbackSound
CMMFeedbackSpriteRenderer	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers
CMMFeedbackSquashAndStretch	This feedback will let you modify the scale of an object on an axis while the other two axis (or only one) get automatically modified to conserve mass
CMMFeedbacksSequencer	A MMSequencer with ready made slots to play MMFeedbacks
CMMFeedbacksShakeEvent
CMMFeedbacksShaker
CMMFeedbackTargetAcquisition	A class collecting target acquisition settings
CMMFeedbackText	This feedback lets you control the contents of a target Text over time
CMMFeedbackTextColor	This feedback lets you control the color of a target Text over time
CMMFeedbackTextFontSize	This feedback lets you control the font size of a target Text over time
CMMFeedbackTextureOffset	This feedback will let you control the texture offset of a target material over time
CMMFeedbackTextureScale	This feedback will let you control the texture scale of a target material over time
CMMFeedbackTimescaleModifier	This feedback changes the timescale by sending a TimeScale event on play
CMMFeedbackTiming	A class collecting delay, cooldown and repeat values, to be used to define the behaviour of each MMFeedback
CMMFeedbackTMPAlpha	This feedback lets you control the alpha of a target TMP over time
CMMFeedbackTMPCharacterSpacing	This feedback lets you control the character spacing of a target TMP over time
CMMFeedbackTMPColor	This feedback lets you control the color of a target TMP over time
CMMFeedbackTMPDilate	This feedback lets you dilate a TMP text over time
CMMFeedbackTMPFontSize	This feedback lets you control the font size of a target TMP over time
CMMFeedbackTMPLineSpacing	This feedback lets you control the line spacing of a target TMP over time
CMMFeedbackTMPOutlineColor	This feedback lets you control the color of a target TMP's outline over time
CMMFeedbackTMPOutlineWidth	This feedback lets you control the outline width of a target TMP over time
CMMFeedbackTMPParagraphSpacing	This feedback lets you control the paragraph spacing of a target TMP over time
CMMFeedbackTMPSoftness	This feedback lets you tweak the softness of a TMP text over time
CMMFeedbackTMPText	This feedback will let you change the text of a target TMP text component
CMMFeedbackTMPTextReveal	This feedback will let you reveal words, lines, or characters in a target TMP, one at a time
CMMFeedbackTMPWordSpacing	This feedback lets you control the word spacing of a target TMP over time
CMMFeedbackUnloadScene	This feedback lets you unload a scene by name or build index
CMMFeedbackVideoPlayer	This feedback lets you control video players in all sorts of ways (Play, Pause, Toggle, Stop, Prepare, StepForward, StepBackward, SetPlaybackSpeed, SetDirectAudioVolume, SetDirectAudioMute, GoToFrame, ToggleLoop)
CMMFeedbackWiggle	When played, this feedback will activate the Wiggle method of a MMWiggle object based on the selected settings, wiggling either its position, rotation, scale, or all of these
CMMFEnumConditionAttribute
CMMFEnumConditionAttributeDrawer
CMMFHiddenAttribute
CMMFHiddenAttributeDrawer
CMMFHiddenPropertiesAttribute
CMMFInformationAttribute
CMMFInformationAttributeDrawer	This class allows the display of a message box (warning, info, error...) next to a property (before or after)
CMMFInspectorButtonAttribute
CMMFInspectorGroupAttribute	An attribute used to group inspector fields under common dropdowns Implementation inspired by Rodrigo Prinheiro's work, available at https://github.com/RodrigoPrinheiro/unityFoldoutAttribute
CMMFInspectorGroupData
CMMFlash	Add this class to an image and it'll flash when getting a MMFlashEvent
CMMFlashDebugSettings
CMMFlashEvent
CMMFloatingText	A class used to handle the movement and behaviour of floating texts, usually used to display damage text. This is designed to be spawned by a MMFloatingTextSpawner, not used on its own. It also requires a specific hierarchy. You'll find examples of it in the MMTools/Tools/MMFloatingText/Prefabs folder
CMMFloatingTextMeshPro	A floating text variant using TextMeshPro instead of regular TextMesh
CMMFloatingTextSpawner	This class will let you pool, recycle and spawn floating texts, usually to show damage info. It requires as input a MMFloatingText object
CMMFloatingTextSpawnEvent	An event used (usually by feedbacks) to trigger the spawn of a new floating text
CMMFReadOnlyAttribute
CMMFReadOnlyAttributeDrawer
CMMFreezeFrameEvent
CMMFVectorAttribute
CMMInputSequenceRecorder	This class lets you record sequences via input presses
CMMInputSequenceRecorderEditor	Custom editor for sequence recorder
CMMLightShakeEvent
CMMLightShaker	Add this to a light to have it receive MMLightShakeEvents from feedbacks or to shake it locally
►CMMLookAtShaker	Add this to an object and it'll be able to listen for MMFLookAtShakeEvents, and when one is received, it will rotate its associated transform accordingly
CMMLookAtShakeEvent	An event used to trigger a look at shake
CMMMiniObjectPool
CMMMiniObjectPooler
CMMMiniPoolableObject	Add this class to an object that you expect to pool from an objectPooler. Note that these objects can't be destroyed by calling Destroy(), they'll just be set inactive (that's the whole point)
CMMPositionShakeEvent
CMMPositionShaker	This shaker will let you move the position of a transform, either once or permanently, shaking its position for the specified duration and within the specified range. You can apply that shake along a direction, randomized or not, with optional noise and attenuation
CMMRotationShakeEvent
CMMRotationShaker	This shaker will let you move the rotation of a transform, either once or permanently, shaking its rotation for the specified duration and within the specified range. You can apply that shake along a direction, randomized or not, with optional noise and attenuation
CMMScaleShakeEvent
CMMScaleShaker	This shaker will let you move the scale of a transform, either once or permanently, shaking its scale for the specified duration and within the specified range. You can apply that shake along a direction, randomized or not, with optional noise and attenuation
CMMSequence	This scriptable object holds "sequences", data used to record and play events in sequence MMSequences can be played by MMFeedbacks from their Timing section, by Sequencers and potentially other classes
CMMSequenceList	A class used to store sequence notes
CMMSequenceNote	A class describing the contents of a sequence note, basically a timestamp and the ID to play at that timestamp
CMMSequencer	This class lets you design a quantized MMSequence using a sequencer interface, and lets you play a quantized sequence, triggering events on beats if specified
CMMSequencerEditor	Custom editor for MMSequencer, handles recalibration and sequencer display
CMMSequenceTrack	A class describing the properties of a sequence's track : ID, color (for the inspector), Key (for the recorder), State (for the recorder)
CMMSetFeedbackRangeCenterEvent	An event used to set the RangeCenter on all feedbacks that listen for it
CMMShaker
CMMSoundSequencer	A MMSequencer with ready made slots to play sounds
CMMSpriteRendererShakeEvent	An event used (usually from MMFeeedbackSpriteRenderer) to shake the values of a SpriteRenderer
CMMSpriteRendererShaker	Add this to a SpriteRenderer to have it receive MMSpriteRendererShakeEvents from feedbacks or to shake it locally
CMMTimeManager	Put this component in your scene and it'll catch MMFreezeFrameEvents and MMTimeScaleEvents, allowing you to control the flow of time
CMMTimeScaleEvent
CMMWiggle	Add this class to a GameObject to be able to control its position/rotation/scale individually and periodically, allowing it to "wiggle" (or just move however you want on a periodic basis)
►CMMWiggleEditor
CWiggleEditorProperties
CTimeScaleProperties	The different settings you can play with on a time scale event
CTmpAttribute
CWiggleProperties	A class to store public wiggle properties
►NFeedbacksForThirdParty
CMMAutoFocus	This class will set the depth of field to focus on the set of targets specified in its inspector
CMMAutoFocus_URP	This class will set the URP depth of field to focus on the set of targets specified in its inspector
CMMBloomShakeEvent	An event used to trigger vignette shakes
CMMBloomShakeEvent_HDRP	An event used to trigger vignette shakes
CMMBloomShakeEvent_URP	An event used to trigger vignette shakes
CMMBloomShaker	Add this class to a Camera with a bloom post processing and it'll be able to "shake" its values by getting events
CMMBloomShaker_HDRP	Add this class to a Camera with a HDRP bloom post processing and it'll be able to "shake" its values by getting events
CMMBloomShaker_URP	Add this class to a Camera with a URP bloom post processing and it'll be able to "shake" its values by getting events
CMMCameraZoom	This class will allow you to trigger zooms on your camera by sending MMCameraZoomEvents from any other class
CMMChannelMixerShakeEvent_HDRP	An event used to trigger vignette shakes
CMMChannelMixerShakeEvent_URP	An event used to trigger vignette shakes
CMMChannelMixerShaker_HDRP	Add this class to a Camera with a HDRP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMChannelMixerShaker_URP	Add this class to a Camera with a URP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShakeEvent	An event used to trigger vignette shakes
CMMChromaticAberrationShakeEvent_HDRP	An event used to trigger vignette shakes
CMMChromaticAberrationShakeEvent_URP	An event used to trigger vignette shakes
CMMChromaticAberrationShaker	Add this class to a Camera with a chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShaker_HDRP	Add this class to a Camera with a HDRP chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShaker_URP	Add this class to a Camera with a URP chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMCinemachineCameraShaker	Add this component to your Cinemachine Virtual Camera to have it shake when calling its ShakeCamera methods
CMMCinemachineClippingPlanesShaker	Add this to a Cinemachine virtual camera and it'll let you control its near and far clipping planes
CMMCinemachineFieldOfViewShaker	Add this to a Cinemachine virtual camera and it'll let you control its field of view over time, can be piloted by a MMFeedbackCameraFieldOfView
CMMCinemachineFreeLookZoom	This class will allow you to trigger zooms on your cinemachine camera by sending MMCameraZoomEvents from any other class
CMMCinemachineOrthographicSizeShaker	Add this to a Cinemachine virtual camera and it'll let you control its orthographic size over time, can be piloted by a MMFeedbackCameraOrthographicSize
CMMCinemachinePriorityBrainListener	Add this to a Cinemachine brain and it'll be able to accept custom blend transitions (used with MMFeedbackCinemachineTransition)
CMMCinemachinePriorityEvent	An event used to pilot priorities on cinemachine virtual cameras and brain transitions
CMMCinemachinePriorityListener	Add this to a Cinemachine virtual camera and it'll be able to listen to MMCinemachinePriorityEvent, usually triggered by a MMFeedbackCinemachineTransition
CMMCinemachineZoom	This class will allow you to trigger zooms on your cinemachine camera by sending MMCameraZoomEvents from any other class
CMMColorAdjustmentsShakeEvent_HDRP	An event used to trigger vignette shakes
CMMColorAdjustmentsShakeEvent_URP	An event used to trigger vignette shakes
CMMColorAdjustmentsShaker_HDRP	Add this class to a Camera with a HDRP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMColorAdjustmentsShaker_URP	Add this class to a Camera with a URP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMColorGradingShakeEvent	An event used to trigger vignette shakes
CMMColorGradingShaker	Add this class to a Camera with a color grading post processing and it'll be able to "shake" its values by getting events
CMMDepthOfFieldShakeEvent	An event used to trigger vignette shakes
CMMDepthOfFieldShakeEvent_HDRP	An event used to trigger vignette shakes
CMMDepthOfFieldShakeEvent_URP	An event used to trigger vignette shakes
CMMDepthOfFieldShaker	Add this class to a Camera with a depth of field post processing and it'll be able to "shake" its values by getting events
CMMDepthOfFieldShaker_HDRP	Add this class to a Camera with a HDRP depth of field post processing and it'll be able to "shake" its values by getting events
CMMDepthOfFieldShaker_URP	Add this class to a Camera with a URP depth of field post processing and it'll be able to "shake" its values by getting events
CMMExposureShakeEvent_HDRP	An event used to trigger exposure shakes
CMMExposureShaker_HDRP	Add this class to a Camera with a HDRP exposure post processing and it'll be able to "shake" its values by getting events
CMMF_Bloom	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a PostProcessVolume with Bloom active, and a MMBloomShaker component
CMMF_Bloom_HDRP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_HDRP component
CMMF_Bloom_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component
CMMF_ChannelMixer_HDRP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_HDRP component.
CMMF_ChannelMixer_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component
CMMF_ChromaticAberration	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a PostProcessVolume with Chromatic Aberration active, and a MMChromaticAberrationShaker component
CMMF_ChromaticAberration_HDRP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with HDRP Chromatic Aberration active, and a MMChromaticAberrationShaker_HDRP component
CMMF_ChromaticAberration_URP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with URP Chromatic Aberration active, and a MMChromaticAberrationShaker_URP component
CMMF_CinemachineImpulse
CMMF_CinemachineImpulseClear
CMMF_CinemachineImpulseSource
CMMF_CinemachineTransition	This feedback will let you change the priorities of your cameras. It requires a bit of setup : adding a MMCinemachinePriorityListener to your different cameras, with unique Channel values on them. Optionally, you can add a MMCinemachinePriorityBrainListener on your Cinemachine Brain to handle different transition types and durations. Then all you have to do is pick a channel and a new priority on your feedback, and play it. Magic transition!
CMMF_ColorAdjustments_HDRP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_HDRP component
CMMF_ColorAdjustments_URP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_URP component
CMMF_ColorGrading	This feedback allows you to control color grading post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a PostProcessVolume with Color Grading active, and a MMColorGradingShaker component
CMMF_DepthOfField	This feedback allows you to control depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a PostProcessVolume with Depth of Field active, and a MMDepthOfFieldShaker component
CMMF_DepthOfField_HDRP	This feedback allows you to control HDRP Depth of Field focus distance or near/far ranges over time. It requires you have in your scene an object with a Volume with Depth of Field active, and a MMDepthOfFieldShaker_HDRP component
CMMF_DepthOfField_URP	This feedback allows you to control URP depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a Volume with Depth of Field active, and a MMDepthOfFieldShaker_URP component
CMMF_Exposure_HDRP	This feedback allows you to control HDRP exposure intensity over time. It requires you have in your scene an object with a Volume with Exposure active, and a MMExposureShaker_HDRP component
CMMF_FilmGrain_HDRP	This feedback allows you to control HDRP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_HDRP component
CMMF_FilmGrain_URP	This feedback allows you to control URP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_URP component
CMMF_GlobalPPVolumeAutoBlend	This feedback will let you pilot a Global PostProcessing Volume AutoBlend component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMF_GlobalPPVolumeAutoBlend_URP	This feedback will let you pilot a Global PostProcessing Volume AutoBlend URP component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMF_Haptics	Add this feedback to be able to trigger haptic feedbacks via the NiceVibration library. It'll let you create transient or continuous vibrations, play presets or advanced patterns via AHAP files, and stop any vibration at any time This feedback has been deprecated, and is just here to avoid errors in case you were to update from an old version. Use the new haptic feedbacks instead
CMMF_LensDistortion	This feedback allows you to control lens distortion intensity over time. It requires you have in your scene an object with a PostProcessVolume with Lens Distortion active, and a MMLensDistortionShaker component
CMMF_LensDistortion_HDRP	This feedback allows you to control HDRP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_HDRP component
CMMF_LensDistortion_URP	This feedback allows you to control URP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_URP component
CMMF_MotionBlur_HDRP	This feedback allows you to control HDRP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_HDRP component
CMMF_MotionBlur_URP	This feedback allows you to control URP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_URP component
CMMF_NVClip	Add this feedback to play a .haptic clip, optionally randomizing its level and frequency
CMMF_NVContinuous	Add this feedback to play a continuous haptic of the specified amplitude and frequency over a certain duration. This feedback will also let you randomize these, and modulate them over time
CMMF_NVControl	Add this feedback to interact with haptics at a global level, stopping them all, enabling or disabling them, adjusting their global level or initializing/release the haptic engine
CMMF_NVEmphasis	Use this feedback to play an Emphasis haptics, short haptic bursts whose amplitude and frequency can be controlled in real time, also called Transients in CoreHaptics/iOS
CMMF_NVPreset	Use this feedback to play a preset haptic, limited but super simple predifined haptic patterns
CMMF_PaniniProjection_HDRP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_HDRP component
CMMF_PaniniProjection_URP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_URP component
CMMF_Vignette	This feedback allows you to control vignette intensity over time. It requires you have in your scene an object with a PostProcessVolume with Vignette active, and a MMVignetteShaker component
CMMF_Vignette_HDRP	This feedback allows you to control HDRP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_HDRP component
CMMF_Vignette_URP	This feedback allows you to control URP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_URP component
CMMF_WhiteBalance_HDRP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_HDRP component
CMMF_WhiteBalance_URP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_URP component
CMMFeedbackBloom	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a PostProcessVolume with Bloom active, and a MMBloomShaker component
CMMFeedbackBloom_HDRP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_HDRP component
CMMFeedbackBloom_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component
CMMFeedbackChannelMixer_HDRP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_HDRP component
CMMFeedbackChannelMixer_URP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_URP component
CMMFeedbackChromaticAberration	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a PostProcessVolume with Chromatic Aberration active, and a MMChromaticAberrationShaker component
CMMFeedbackChromaticAberration_HDRP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with HDRP Chromatic Aberration active, and a MMChromaticAberrationShaker_HDRP component
CMMFeedbackChromaticAberration_URP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with URP Chromatic Aberration active, and a MMChromaticAberrationShaker_URP component
CMMFeedbackCinemachineImpulse
CMMFeedbackCinemachineImpulseClear
CMMFeedbackCinemachineTransition	This feedback will let you change the priorities of your cameras. It requires a bit of setup : adding a MMCinemachinePriorityListener to your different cameras, with unique Channel values on them. Optionally, you can add a MMCinemachinePriorityBrainListener on your Cinemachine Brain to handle different transition types and durations. Then all you have to do is pick a channel and a new priority on your feedback, and play it. Magic transition!
CMMFeedbackColorAdjustments_HDRP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_HDRP component
CMMFeedbackColorAdjustments_URP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_URP component
CMMFeedbackColorGrading	This feedback allows you to control color grading post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a PostProcessVolume with Color Grading active, and a MMColorGradingShaker component
CMMFeedbackDepthOfField	This feedback allows you to control depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a PostProcessVolume with Depth of Field active, and a MMDepthOfFieldShaker component
CMMFeedbackDepthOfField_URP	This feedback allows you to control URP depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a Volume with Depth of Field active, and a MMDepthOfFieldShaker_URP component
CMMFeedbackExposure_HDRP	This feedback allows you to control HDRP exposure intensity over time. It requires you have in your scene an object with a Volume with Exposure active, and a MMExposureShaker_HDRP component
CMMFeedbackFilmGrain_HDRP	This feedback allows you to control HDRP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_HDRP component
CMMFeedbackFilmGrain_URP	This feedback allows you to control URP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_URP component
CMMFeedbackGlobalPPVolumeAutoBlend	This feedback will let you pilot a Global PostProcessing Volume AutoBlend component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMFeedbackGlobalPPVolumeAutoBlend_URP	This feedback will let you pilot a Global PostProcessing Volume AutoBlend URP component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMFeedbackHaptics	Add this feedback to be able to trigger haptic feedbacks via the NiceVibration library. It'll let you create transient or continuous vibrations, play presets or advanced patterns via AHAP files, and stop any vibration at any time This feedback has been deprecated, and is just here to avoid errors in case you were to update from an old version. Use the new haptic feedbacks instead
CMMFeedbackLensDistortion	This feedback allows you to control lens distortion intensity over time. It requires you have in your scene an object with a PostProcessVolume with Lens Distortion active, and a MMLensDistortionShaker component
CMMFeedbackLensDistortion_HDRP	This feedback allows you to control HDRP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_HDRP component
CMMFeedbackLensDistortion_URP	This feedback allows you to control URP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_URP component
CMMFeedbackMotionBlur_HDRP	This feedback allows you to control HDRP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_HDRP component
CMMFeedbackMotionBlur_URP	This feedback allows you to control URP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_URP component
CMMFeedbackNVClip	Add this feedback to play a .haptic clip, optionally randomizing its level and frequency
CMMFeedbackNVContinuous	Add this feedback to play a continuous haptic of the specified amplitude and frequency over a certain duration. This feedback will also let you randomize these, and modulate them over time
CMMFeedbackNVControl	Add this feedback to interact with haptics at a global level, stopping them all, enabling or disabling them, adjusting their global level or initializing/release the haptic engine
CMMFeedbackNVEmphasis	Use this feedback to play an Emphasis haptics, short haptic bursts whose amplitude and frequency can be controlled in real time, also called Transients in CoreHaptics/iOS
CMMFeedbackNVPreset	Use this feedback to play a preset haptic, limited but super simple predifined haptic patterns
CMMFeedbackNVSettings	A class used to store and manage common Nice Vibrations feedback settings
CMMFeedbackPaniniProjection_HDRP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_HDRP component
CMMFeedbackPaniniProjection_URP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_URP component
CMMFeedbackVignette	This feedback allows you to control vignette intensity over time. It requires you have in your scene an object with a PostProcessVolume with Vignette active, and a MMVignetteShaker component
CMMFeedbackVignette_HDRP	This feedback allows you to control HDRP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_HDRP component
CMMFeedbackVignette_URP	This feedback allows you to control URP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_URP component
CMMFeedbackWhiteBalance_HDRP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_HDRP component
CMMFeedbackWhiteBalance_URP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_URP component
CMMFilmGrainShakeEvent_HDRP	An event used to trigger FilmGrain shakes
CMMFilmGrainShakeEvent_URP	An event used to trigger FilmGrain shakes
CMMFilmGrainShaker_HDRP	Add this class to a Camera with a HDRP FilmGrain post processing and it'll be able to "shake" its values by getting events
CMMFilmGrainShaker_URP	Add this class to a Camera with a URP FilmGrain post processing and it'll be able to "shake" its values by getting events
CMMGlobalPostProcessingVolumeAutoBlend	Use this class to have a global PP volume auto blend its weight on cue, between a start and end values
CMMGlobalPostProcessingVolumeAutoBlend_URP	Use this class to have a global PP volume auto blend its weight on cue, between a start and end values
CMMLensDistortionShakeEvent	An event used to trigger vignette shakes
CMMLensDistortionShakeEvent_HDRP	An event used to trigger vignette shakes
CMMLensDistortionShakeEvent_URP	An event used to trigger vignette shakes
CMMLensDistortionShaker	Add this class to a Camera with a lens distortion post processing and it'll be able to "shake" its values by getting events
CMMLensDistortionShaker_HDRP	Add this class to a Camera with a HDRP lens distortion post processing and it'll be able to "shake" its values by getting events
CMMLensDistortionShaker_URP	Add this class to a Camera with a URP lens distortion post processing and it'll be able to "shake" its values by getting events
CMMMotionBlurShakeEvent_HDRP	An event used to trigger vignette shakes
CMMMotionBlurShakeEvent_URP	An event used to trigger vignette shakes
CMMMotionBlurShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMMotionBlurShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMPaniniProjectionShakeEvent_HDRP	An event used to trigger vignette shakes
CMMPaniniProjectionShakeEvent_URP	An event used to trigger vignette shakes
CMMPaniniProjectionShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMPaniniProjectionShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShakeEvent	An event used to trigger vignette shakes
CMMVignetteShakeEvent_HDRP	An event used to trigger vignette shakes
CMMVignetteShakeEvent_URP	An event used to trigger vignette shakes
CMMVignetteShaker	Add this class to a Camera with a vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMWhiteBalanceShakeEvent_HDRP	An event used to trigger vignette shakes
CMMWhiteBalanceShakeEvent_URP	An event used to trigger vignette shakes
CMMWhiteBalanceShaker_HDRP	Add this class to a Camera with a white balance post processing and it'll be able to "shake" its values by getting events
CMMWhiteBalanceShaker_URP	Add this class to a Camera with a white balance post processing and it'll be able to "shake" its values by getting events
►NInventoryEngine
CArmorItem	Demo class for an example armor item
CBaseItem	Base item class, to use when your object doesn't do anything special
CBombItem	Demo class for a bomb item
CChangeLevel	Demo class to go from one level to another
CDemoCharacterInputManager	A very simple input manager to handle the demo character's input and make it move
CEventTester	This class shows examples of how you can listen to MMInventoryEvents, from any class
CHealthBonusItem	Demo class for a health item
CInventory	Base inventory class. Will handle storing items, saving and loading its content, adding items to it, removing items, equipping them, etc
CInventoryCharacterIdentifier	When working in a multiplayer context, add this class to characters that can pick items and ItemPickers will automatically send items to the right PlayerID
CInventoryCounterDisplay	Use this class to display the total quantity of one or more given items in one or more given inventories
CInventoryDemoCharacter	Demo character controller, very basic stuff
CInventoryDemoGameManager	An example of a game manager, the only significant part being how we trigger in a single place the load of all inventories, in the Start method
CInventoryDemoStorageBox	This class shows a simple example of a storage box, that will display a target inventory when the Player character is on top of it, and close it when the character exits the zone
CInventoryDetails	A class used to display an item's details in GUI
►CInventoryDisplay	A component that handles the visual representation of an Inventory, allowing the user to interact with it
CItemQuantity
CInventoryDisplayEditor	Custom editor for the InventoryDisplay component
CInventoryDisplayGrid	The class used to reference the grid component of an InventoryDisplay
CInventoryDisplayTitle	The class used to reference the title component of an InventoryDisplay
CInventoryEditor	Custom editor for the Inventory component
CInventoryHotbar	Special kind of inventory display, with a dedicated key associated to it, to allow for shortcuts for use and equip
►CInventoryInputActions	This class lets you bind keys to specific slots in a target inventory, and associate an action to execute when that key is pressed. A typical use case would be a weapon bar, where pressing 1 equips a gun, pressing 2 equips a shotgun, etc. Coincidentally, that's what the PixelRogueWeaponBar demo scene demonstrates
CInventoryInputActionsBindings	A class used to store slot / key / action bindings
CInventoryInputManager	Example of how you can call an inventory from your game. I suggest having your Input and GUI manager classes handle that though
CInventoryItem	Base class for inventory items, meant to be extended. Will handle base properties and drop spawn
CInventoryItemDisplayProperties
CInventoryItemEditor	Custom editor for the InventoryItem component
CInventorySelectionMarker	This class handles the selection marker, that will mark the currently selected slot
CInventorySlot	This class handles the display of the items in an inventory and will trigger the various things you can do with an item (equip, use, etc.)
CInventorySlotEditor
CInventorySoundPlayer	A component that will handle the playing of songs when paired with an InventoryDisplay
CInventoryTester	This test class lets you play with the Inventory API. You can see it in action in the PixelRogueRoom2 demo scene
CItemPicker	Add this component to an object so it can be picked and added to an inventory
CMMInventoryEvent	Inventory events are used throughout the Inventory Engine to let other interested classes know that something happened to an inventory.
CPickableInventoryItemEditor	Pickable inventory item editor
CPixelRogueDemoResetAll	A very small class used to reset inventories and persistence data in the PixelRogue demos
CSerializedInventory	Serialized class to help store / load inventories from files
CWeaponItem	Demo class for a weapon item
►NMMInterface
CMMCarousel	A class to handle a carousel of UI elements, placed in an HorizontalLayoutGroup. All elements of the carousel need to have the same width
CMMCheckbox	A class to handle checkboxes
CMMPopup	A component to handle popups, their opening and closing
CMMRadioButton	A class to handle radio buttons. To group them, just use the same RadioButtonGroupName string for all radio buttons in the group
CMMScrollviewButton
CMMSpriteReplace	A class to add to an Image or SpriteRenderer to have it act like a button with a different sprite for on and off states
CMMSpriteReplaceCycle	A class to add to a button so that its sprite cycles through X sprites when pressed
CMMSwitch	A component to handle switches
►NTools
CAIAction	Actions are behaviours and describe what your character is doing. Examples include patrolling, shooting, jumping, etc
CAIActionPropertyInspector
CAIActionsList
CAIBrain	the AI brain is responsible from going from one state to the other based on the defined transitions. It's basically just a collection of states, and it's where you'll link all the actions, decisions, states and transitions together
CAIBrainEditor
CAIDecision	Decisions are components that will be evaluated by transitions, every frame, and will return true or false. Examples include time spent in a state, distance to a target, or object detection within an area.
CAIState	A State is a combination of one or more actions, and one or more transitions. An example of a state could be "_patrolling until an enemy gets in range_"
CAITransition	Transitions are a combination of one or more decisions and destination states whether or not these transitions are true or false. An example of a transition could be "_if an enemy gets in range, transition to the Shooting state_"
CAITransitionPropertyInspector
CAITransitionsList
CAxisEvent
CBeat
CDictionaryStringSceneData	A serializable class used to store scene data, the key is a string (the scene name), the value is a MMPersistencySceneData
CDictionaryStringString	A serializable class used to store object data, the key is a string (the object name), the value is a string (the object data)
CFloatController	A class used to control a float in any other class, over time To use it, simply drag a monobehaviour in its target field, pick a control mode (ping pong or random), and tweak the settings
CFloatControllerEditor	Custom editor for the FloatController, conditional hiding and dropdown fill
CFogSettings	A simple class used to store fog properties
CHealthBarEditor	Custom editor for health bars (mostly a switch for prefab based / drawn bars
CIMMPersistent	An interface classes that want to be saved by the MMPersistencyManager need to implement
CIMMSaveLoadManagerMethod	An interface to implement save and load using different methods (binary, json, etc)
CJoystickEvent
CJoystickFloatEvent
CLightController	A class used to control the intensity of a light
CMMAchievement
CMMAchievementChangedEvent
CMMAchievementDisplayer	A class used to display the achievements on screen. The AchievementDisplayItems will be parented to it, so it's better if it has a LayoutGroup (Vertical or Horizontal) too
CMMAchievementDisplayItem	This class is used to display an achievement. Add it to a prefab containing all the required elements listed below
CMMAchievementList	A scriptable object containing a list of achievements. You need to create one and store it in a Resources folder for this to work
CMMAchievementListInspector	Custom inspector for the MMAchievementList scriptable object
CMMAchievementRules	That class is meant to be extended to implement the achievement rules specific to your game
CMMAchievementUnlockedEvent	An event type used to broadcast the fact that an achievement has been unlocked
CMMActivationOnStart	Use this class to enable or disable other gameobjects automatically on Start or Awake
CMMAdditiveSceneLoadingManager	A class to load scenes using a loading screen instead of just the default API This is a new version of the classic LoadingSceneManager (now renamed to MMSceneLoadingManager for consistency)
CMMAdditiveSceneLoadingManagerSettings	A simple class used to store additive loading settings
CMMAim
CMMAnimationCurveGenerator	This class will let you create and save a .curves asset in the specified path This asset will include curves (anti or not) from the MMTween library, to use anywhere animation curves are required
CMMAnimationModifier	Add this script to an animation in Mecanim and you'll be able to control its start position and speed
CMMAnimationParameter	A helper class that will hash a animation parameter and update it on demand
►CMMAnimatorMirror	This class will let you mirror the behaviour of an Animator's parameters on a Source Animator onto the ones of a Target Animator. Target will mirror Source. Only the parameters existing on both Target and Source will be considered, you'll need to have the same on both before entering runtime
CMMAnimatorMirrorBind	Struct used to store bindings
CMMApplicationPlatformActivation	Add this class to a gameobject, and it'll enable/disable it based on platform context, using Application.platform to detect the platform
CMMApplicationQuit	A super simple mono you can add to an object to call its Quit method, which will force the application to quit
CMMArray	Array helpers
CMMAspectRatioSafeZones	A class to handle the automatic display of safe zones for the different ratios setup in the inspector
CMMAspectRatioSafeZonesEditor	Custom editor for the MMScreenSafeZones component
CMMAudioAnalyzer	This component lets you pick an audio source (either global : the whole scene's audio, a unique source, or the microphone), and will cut it into chunks that you can then use to emit beat events, that other objects can consume and act upon. The sample interval is the frequency at which sound will be analyzed, the amount of spectrum samples will determine the accuracy of the sampling, the window defines the method used to reduce leakage, and the number of bands will determine in how many bands you want to cut the sound. The more bands, the more levers you'll have to play with afterwards. In general, for all of these settings, higher values mean better quality and lower performance. The buffer speed determines how fast buffered band levels readjust
CMMAudioEvents
CMMAudioListener	A simple component that will ensure (if put on ALL audio listeners in your game) that you never see a "There are two audio listeners in the scene" warning again
CMMAutoDestroyParticleSystem	Add this class to a ParticleSystem so it auto destroys once it has stopped emitting. Make sure your ParticleSystem isn't looping, otherwise this script will be useless
CMMAutoExecution	This simple class lets you trigger Unity events automatically, on Awake, Enable, Disable, Start, or on instantiate For that last one, you'll want to send a "OnInstantiate" message when instantiating this object
CMMAutoExecutionItem	A data class to store auto execution info to be used in MMAutoExecution
CMMAutoInputModule	This helper class handles adding the appropriate input module depending on whether the project is using the old or new input system
CMMAutoOrderInLayer	Add this component to an object to have it pick a new order in layer on start, useful to have unique sorting layer numbers
CMMAutoRotate	Add this class to a GameObject to make it rotate on itself
CMMAutoRotateEditor	Custom editor for the MMAutoRotate component
CMMBackgroundColorAttribute
CMMBackgroundColorAttributeDrawer
CMMBeatEvent	An event you can listen to that will get automatically triggered for every remapped beat
CMMBezierLineRenderer	Add this class to a line renderer and it'll add control points that let you turn your line into a bezier curve
CMMBillboard	Add this class to an object (usually a sprite) and it'll face the camera at all times
CMMBoundsExtensions	Bounds helpers
CMMCameraAspectRatio	Forces an aspect ratio on a camera
CMMCameraFog	Add this class to a camera and it will override fog settings when active
CMMChangeFogColor	Adds this class to a UnityStandardAssets.ImageEffects.GlobalFog to change its color Why this is not native, I don't know
CMMCinemachineZone	An abstract class that lets you define a zone that, when entered, enables a virtual camera, and takes care of all the boilerplate setup
CMMCinemachineZone2D	2D Implementation of the CinemachineZone abstract class
CMMCinemachineZone3D	3D Implementation of the CinemachineZone abstract class
CMMCircularList	A improved list that lets you parse it and automatically have it loop to the start or end when you reach the end or start To use it : set the CurrentIndex to whatever you want, then use IncrementCurrentIndex / DecrementCurrentIndex to move it, get the current element via Current
CMMCleanEmptyFolders	A maintenance class that removes all empty directories from a project via a menu item
CMMCleanupMissingScripts	This class lets you clean all missing scripts on a selection of gameobjects
CMMColorAttribute
CMMColorAttributeDrawer
CMMConditionalActivation	Add this component to a gameobject, and it'll let you enable target monos after all other targets have been disabled
CMMConditionAttribute
CMMConditionAttributeDrawer
►CMMConeOfVision	This class will create a cone of vision defined by an angle and a distance around a point. It will look for targets within that field, and draw a mesh to show the cone of vision initially inspired by this great tutorial by Sebastian Lague : https://www.youtube.com/watch?v=rQG9aUWarwE - check out his tutorials, they're amazing!
CMeshEdgePosition
CRaycastData	A struct to store raycast data
►CMMConeOfVision2D
CMeshEdgePosition
CRaycastData
CMMConeOfVision2DInspector
CMMConeOfVisionInspector
CMMConsole	This class displays an on-screen console for easier debugging DO NOT ADD THIS CLASS AS A COMPONENT. Instead, use the MMDebug.DebugOnScreen methods that will take care of everything
CMMControlsTestInputManager	This persistent singleton handles the inputs and sends commands to the player in the MMControls demo, its sole purpose is to output debug logs of the various interactions with the demo's inputs
CMMCooldown	A class to handle cooldown related properties and their resource consumption over time Remember to initialize it (once) and update it every frame from another class
►CMMCountdown
CMMCountdownFloor	A class to store floor information
CMMCursorVisible	Add this class to an object and it'll make sure that the cursor is either visible or invisible
CMMDButtonPressedEvent	An event fired when a button gets pressed in a MMDebugMenu
CMMDCheckboxFalseEvent
CMMDCheckboxPressedEvent
CMMDCheckboxTrueEvent
CMMDebugController	Add this class to an empty object in your scene and it'll act as a point of control to enable or disable logs and debug draws
CMMDebugEditor	An editor class used to display menu items
CMMDebugLogCommandArgumentCountAttribute	An attribute to add to static methods to they can be called via the MMDebugMenu's command line
CMMDebugLogCommandAttribute	An attribute to add to static methods to they can be called via the MMDebugMenu's command line
CMMDebugMenu	A debug menu helper, meant to help create quick mobile friendly debug menus
CMMDebugMenuButtonEvent	An event used to broadcast button events from a MMDebugMenu
CMMDebugMenuButtonEventListener	A class used to listen to button events from a MMDebugMenu
CMMDebugMenuCheckboxEvent	An event used to broadcast checkbox events from a MMDebugMenu
CMMDebugMenuCheckboxEventListener	A class used to listen to events from a MMDebugMenu's checkbox
CMMDebugMenuChoiceEntry	A class used to store choices contents
CMMDebugMenuCommands	Command lines to be run from the MMDebugMenu To add new ones, add the [MMDebugLogCommand] attribute to any static method
CMMDebugMenuData	A data class used to store the contents of a debug menu
CMMDebugMenuDebugTab	A class used to handle the display of a debug log tab in a MMDebugMenu
CMMDebugMenuItem	A class used to store a menu item
CMMDebugMenuItemButton	A class used to bind a button to a MMDebugMenu
CMMDebugMenuItemCheckbox	A class used to bind a checkbox to a MMDebugMenu
CMMDebugMenuItemChoices	A class used to bind a Choice menu item to a MMDebugMenu
CMMDebugMenuItemList	A class used to store and display a reorderable list of menu items
CMMDebugMenuItemSlider	A class used to bind a slider to a MMDebugMenu
CMMDebugMenuItemText	A class used to bind a text item to a MMDebugMenu
CMMDebugMenuItemTitle	A class used to bind a title item to a MMDebugMenu
CMMDebugMenuItemValue	A class used to bind a value item to a MMDebugMenu
CMMDebugMenuRadioButton	A class to handle radio buttons. To group them, just use the same RadioButtonGroupName string for all radio buttons in the group
CMMDebugMenuSliderEvent	An event used to broadcast slider events from a MMDebugMenu
CMMDebugMenuSliderEventListener	A class used to listen to slider events from a MMDebugMenu
CMMDebugMenuSpriteReplace	A class to add to an image to have it act like a button with a different sprite for on and off states
CMMDebugMenuSwitch	A component to handle switches
CMMDebugMenuTab	A class used to handle the display of a tab in a MMDebugMenu
CMMDebugMenuTabContents	A class used to describe tab contents
CMMDebugMenuTabData
CMMDebugMenuTabManager	A class used to keep track of tabs and their contents in a MMDebugMenu
CMMDebugMenuTestClass	A simple test class used in the MMDebugMenu demo scene to shake a few values and output them in the debug on screen console
CMMDebugOnScreenConsole
CMMDebugTouchDisplay	Add this class to a canvas and it'll automatically reposition TouchPrefabs at the position of touches You can set a higher TouchProvision if your game gets more than the default number (6) simultaneous touches Disable/enable this mono for it to stop/work
CMMDelayParticles	MM delay particles
CMMDontDestroyOnLoad	Add this component to an object and it'll persist across scenes
CMMDoubleSpriteMask	This setup uses two sprite masks, bound in the inspector, to enable one and then disable the other to mask specific parts of a level
CMMDropdownAttribute
CMMDropdownAttributeDrawer
CMMDSliderValueChangedEvent
CMMEmmiterReceiver	This component lets you very easily have one property drive the value of another property. To do so, drag the object with the property you want to "read" from into the Emitter Property slot, then select the component the property is on, and finally the property itself. Then drag the object with the property you want to "write" to into the ReceiverProperty slot, and pick the property you want to drive with the emitter's value
CMMEnumConditionAttribute	An attribute to conditionnally hide fields based on the current selection in an enum. Usage : [MMEnumCondition("rotationMode", (int)RotationMode.LookAtTarget, (int)RotationMode.RotateToAngles)]
CMMEnumConditionAttributeDrawer
CMMEventListener	A public interface you'll need to implement for each type of event you want to listen to
CMMEventListenerBase	Event listener basic interface
CMMEventListenerWrapper
CMMExecutionOrderAttribute	Add this attribute to a class and its Execution Order will be changed to the value specified in parameters Usage : [ExecutionOrder(66)]
CMMFaceDirection	Use this script to have a Transform automatically face a certain direction, whether its own movement direction, or a specific target Transform
CMMFadeEvent	Events used to trigger faders on or off
CMMFadeInEvent
CMMFadeOutEvent
CMMFader	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly
CMMFaderDirectional	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly. This specific fader will move from left to right, right to left, top to bottom or bottom to top
CMMFaderRound	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly
CMMFadeStopEvent	An event used to stop fades
CMMFollowTarget	Add this component to an object and it'll get moved towards the target at update, with or without interpolation based on your settings
CMMFPSCounter	Add this class to a gameObject with a Text component and it'll feed it the number of FPS in real time
CMMFPSUnlock	Add this component to any object and it'll set the target frame rate and vsync count. Note that vsync count must be 0 for the target FPS to work
CMMGameEvent	MMGameEvents are used throughout the game for general game events (game started, game ended, life lost, etc.)
CMMGameEventListener	Add this component to an object, and it'll let you easily trigger UnityEvents when the event of the specified name is triggered
CMMGetFocusOnEnable	Add this helper to an object and focus will be set to it on Enable
CMMGhostCamera	Add this class to a camera and you'll be able to pilot it using the horizontal/vertical axis, and up/down controls set via its inspector. It's got an activation button, a run button, and an option to slow down time (this will require a MMTimeManager present in the scene)
CMMGizmo	Add this component to an object and it'll let you display a gizmo for its position or collider, and an optional text
CMMGizmoEditor	a custom editor for the MMGizmo component
CMMGridGenerator
CMMGridGeneratorFull	Generates a grid of the specified size, either entirely full or empty
CMMGridGeneratorPath	Generates a grid with a path in the specified direction
CMMGridGeneratorPerlinNoise	Generates a grid of the specified size based on a seeded perlin noise, the smaller the seed, the blockier the grid
CMMGridGeneratorPerlinNoiseGround	Generates a grid with a ground floor
CMMGridGeneratorRandom	Generates a simple grid filled with random points
CMMGridGeneratorRandomWalk	Generates a grid with a path carved by a drunkard walk algorithm See http://pcg.wikidot.com/pcg-algorithm:drunkard-walk
CMMGridGeneratorRandomWalkAvoider	Generates a grid with a path carved by a drunkard walk algorithm that will avoid another grid's walls
CMMGridGeneratorRandomWalkGround	Uses random walk to generate a ground with controlled elevation
CMMGroupSelection	A class used to add a menu item and a shortcut to group objects together under a parent game object
CMMGyroCam	A class used to store gyro properties per camera
CMMGyroParallax	Add this class to a camera rig (an empty object), bind some Cinemachine virtual cameras to it, and they'll move around the specified object as your gyro powered device moves
CMMGyroscope
CMMHealthBar	Add this component to an object and it will show a healthbar above it You can either use a prefab for it, or have the component draw one at the start
CMMHiddenAttribute
CMMHiddenAttributeDrawer
CMMHiddenPropertiesAttribute
CMMImage	Image helpers
CMMInformationAttribute
►CMMInput	Input helpers
CIMButton	IM button, short for InputManager button, a class used to handle button states, whether mobile or actual keys
CMMInputExecution	A simple class used to bind target keys to specific events to trigger when the key is pressed or released
CMMInputExecutionBinding	A class used to store MMInputExecution bindings, associating a target keycode to UnityEvents
CMMInspectorButtonAttribute
CMMInspectorGroupAttribute	An attribute used to group inspector fields under common dropdowns Implementation inspired by Rodrigo Prinheiro's work, available at https://github.com/RodrigoPrinheiro/unityFoldoutAttribute
CMMInspectorGroupData
CMMInterval
CMMIStateMachine	Public interface for the state machine
CMMLayer
CMMLayerPropertyDrawer
CMMLayers
CMMLineRendererCircle
CMMLineRendererDriver	This component, added to a line renderer, will let you fill a list of transforms, and bind their positions to the linerenderer's positions
CMMLoadScene	Add this component on an object, specify a scene name in its inspector, and call LoadScene() to load the desired scene
CMMLockInspector	A simple class that lets you lock the current inspector by pressing ctrl (or cmd) + L Pressing the same shortcut again unlocks the
CMMLoot	A class defining the contents of a MMLootTable
CMMLootFloat	a MMLoot implementation for floats
CMMLootGameObject	a MMLoot implementation for gameobjects
CMMLootString	a MMLoot implementation for strings
CMMLootTable	A loot table helper that can be used to randomly pick objects out of a weighted list This design pattern was described in more details by Daniel Cook in 2014 in his blog : https://lostgarden.home.blog/2014/12/08/loot-drop-tables/
CMMLootTableFloat	A MMLootTable implementation for floats
CMMLootTableGameObject	A MMLootTable implementation for GameObjects
CMMLootTableGameObjectSO	A scriptable object containing a MMLootTable definition for game objects
CMMLootTableString	A MMLootTable implementation for strings
CMMMeshToPolygonCollider2D	A class that lets you create polygon collider 2D out of mesh filters
CMMMonoBehaviour
CMMMonoBehaviourDrawer	A generic drawer for all MMMonoBehaviour, handles both the Group and RequiresConstantRepaint attributes
CMMMultipleObjectPooler	This class allows you to have a pool of various objects to pool from
CMMMultipleObjectPoolerObject	Multiple object pooler object
CMMNavMeshAreaMaskAttribute
CMMObjectBounds
CMMObjectPool
CMMObjectPooler	A base class, meant to be extended depending on the use (simple, multiple object pooler), and used as an interface by the spawners. Still handles common stuff like singleton and initialization on start(). DO NOT add this class to a prefab, nothing would happen. Instead, add SimpleObjectPooler or MultipleObjectPooler
CMMObservable	This struct lets you declare observable properties. For example, let's say you have a class called Character, and you declare its speed like so :
CMMObservableDemoObserver	A test class used to demonstrate the MMObservable in the MMObservableTest demo scene
CMMObservableDemoObserverAutoSleep	A test class used to demonstrate the MMObservable pattern in the MMObservableDemo scene This one disables itself on Awake, and passively listens for changes, even when disabled
CMMObservableDemoSubject	A test class used to demonstrate how MMObservable works in the MMObservableTest demo scene
CMMOffsetAnimation	Use this class to offset an animation by a random range
CMMOnMouse	Attach this class to a collider and it'll let you trigger events when the user clicks/drags/enters/etc that collider
CMMOnPointer	A simple helper class you can use to trigger methods on Unity's pointer events Typically used on a UI Image
CMMOpenURL	A class used to open a URL specified in its inspector
CMMOrbitalCamera	A class used to make a camera orbit around a target
CMMPanningTexture	Use this class on a sprite or mesh to have its texture pan according to the specified speed You can also force a sorting layer name
►CMMParallaxUI	Use this class to bind a number of UI layers to the movements of a mouse cursor, or a mobile device gyroscope, or even have it be piloted by another script By setting different speed/amplitude values for each of your UI layers, you'll be able to create a nice parallax effect
CParallaxLayer	A class used to store layer settings
CMMParentingOnStart	This component lets you parent the transform you put it on to any target parent (or to the root if none is set), on Awake, Start or anytime you call its Parent() method
►CMMPath	Add this component to an object and you'll be able to define a path, that can then be used by another component
CData	A data structure
CMMPathMovement	Add this component to an object and it'll be able to move along a path defined from its inspector
CMMPathMovementElement	This class describes a node on an MMPath
CMMPeriodicExecution	This class will let you trigger a OnRandomInterval event periodically, at random intervals
CMMPersistenceEvent	A data structure used to store persistence event data. To use : MMPersistencyEvent.Trigger(MMPersistencyEventType.DataLoadedFromFileToMemory, "yourPersistencyID");
CMMPersistenceManager	Add this component to a scene and it'll let you save and load the state of objects that implement the IMMPersistent interface You can create your own classes that implement this interface, or use the MMPersistent class that comes with this package It will save their transform data (position, rotation, scale) and their active state Triggering save and load is done via events, and the manager also emits events every time data is loaded or saved
CMMPersistenceManagerData	A serializable class used to store all the data for a persistence manager, a collection of scene datas
CMMPersistenceSceneData	A serializable class used to store all the data for a scene, a collection of object datas
►CMMPersistent	A persistent class that can save the essential parts of an object : its transform data (position, rotation, scale) and its active state This inherits from MMPersistentBase and implements the IMMPersistent interface It's a good example of how to implement the interface's OnSave and OnLoad methods
CComponentData
CData	A struct used to store and serialize the data we want to save
CMMPersistentBase	A base class implementing the IMMPersistent interface, designed to be extended This mostly takes care of the GUID generation and validation
CMMPersistentHumbleSingleton	Persistent humble singleton, basically a classic singleton but will destroy any other older components of the same type it finds on awake
CMMPersistentSingleton	Persistent singleton
CMMPlatformActivation	Add this class to a gameobject, and it'll enable/disable it based on platform context, using conditional defintions to do so
CMMPlaylist	Use this class to play audiosources (usually background music but feel free to use that for anything) in sequence, with optional crossfade between songs
CMMPlaylistChangeEvent
CMMPlaylistNewSongStartedEvent
CMMPlaylistPauseEvent
CMMPlaylistPitchMultiplierEvent
CMMPlaylistPlayEvent	This class stores all the info related to items in a playlist
CMMPlaylistPlayIndexEvent
CMMPlaylistPlayNextEvent
CMMPlaylistPlayPreviousEvent
CMMPlaylistRemote	A class used to pilot a MMPlaylist
CMMPlaylistSong
CMMPlaylistStopEvent
CMMPlaylistVolumeMultiplierEvent
CMMPlotter
CMMPlotterAxis
CMMPlotterEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CMMPlotterGenerator
CMMPoolableObject	Add this class to an object that you expect to pool from an objectPooler. Note that these objects can't be destroyed by calling Destroy(), they'll just be set inactive (that's the whole point)
CMMPositionRecorder	Add this class on a Transform, and it'll record its position periodically The Positions array can then be read from anywhere to know where that object was in the past
CMMPostProcessingMovingFilter
CMMPostProcessingMovingFilterEvent	An event used to move filters on and off a camera
CMMPreventPassingThrough	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMPreventPassingThrough2D	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMPreventPassingThrough3D	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMProgressBar	Add this bar to an object and link it to a bar (possibly the same object the script is on), and you'll be able to resize the bar object based on a current value, located between a min and max value. See the HealthBar.cs script for a use case
CMMProgressBarDemoAuto
CMMProperty
CMMPropertyEmitter	A class used to pick a property, and remap its value for emission/broadcast
CMMPropertyEmitterDrawer
CMMPropertyLink	A class, meant to be extended, used to control a MMProperty and get/set its value
CMMPropertyLinkBool	Bool property setter
CMMPropertyLinkColor	Color property setter
CMMPropertyLinkFloat	Float property setter
CMMPropertyLinkInt	Int property setter
CMMPropertyLinkQuaternion	Quaternion property setter
CMMPropertyLinkString	String property setter
CMMPropertyLinkVector2	Vector2 property setter
CMMPropertyLinkVector3	Vector3 property setter
CMMPropertyLinkVector4
CMMPropertyPicker	A class used to pick a property on a target object / component / scriptable object
►CMMPropertyPickerDrawer
CPropertyPickerViewData
CMMPropertyReceiver	A class used to pick a property and modify its value
CMMPropertyReceiverDrawer
CMMPSBToUIConverter
CMMRadialProgressBar	Add this class to a radial image and it'll allow you to control its fill amount This is a legacy class, and it's recommended to use MMProgressBar instead, it'll provide the same functionality (make sure you pick FillAmount as the FillMode) and much more options, such as delayed bars, events, bump, and more!
CMMRadioBroadcaster	A class used to broadcast a level to MMRadioReceiver(s), either directly or via events It can read from pretty much any value on any class
CMMRadioLevelEvent	A struct event used to broadcast the level to channels
CMMRadioReceiver	A class used to receive level values from a MMRadioBroadcaster, and apply it to (almost) any value on any object
CMMRadioSignal	A class used to define a signal, meant to be broadcasted by a MMRadioBroadcaster It'll output a Level value to broadcast, using one time, persistent or driven modes Meant to be extended
CMMRadioSignalAudioAnalyzer	A class used to expose a beat level from a target MMAudioAnalyzer, to be broadcasted by a MMAudioBroadcaster
CMMRadioSignalEditor
CMMRadioSignalGenerator	A class used to generate signals, normalized values between 0 and 1 You can then use these values from a MMRadioBroadcaster, or simply evaluate its value to use wherever you want, like a supercharged animation curve. In that case, simply disable the component, and read from it using its Evaluate method
CMMRadioSignalGeneratorEditor
CMMRadioSignalGeneratorItem	A class used to store generator items and their properties
CMMRadioSignalGeneratorItemList	A reorderable list type used to store generator items
CMMRadioSignalOnValueChange
CMMRagdoller	Use this class to pilot a ragdoll on a character that is usually driven by an animator and have it fall elegantly If you have parts of your ragdoll that you don't want to be affected by this script (a weapon for example), just add a MMRagdollerIgnore component to them
CMMRagdollerIgnore	Add this class to objects you'd like to be unaffected by the MMRagdoller (like weapons for example)
CMMRandomBoundsInstantiator	This class lets you randomly spawn objects within its bounds (defined by a 3D collider)
CMMRandomInstantiator	Add this class to an empty object, bind a few prefabs into its RandomPool slots, and it'll instantiate one of them at its position/rotation on Start or Awake You can also call its InstantiateRandomObject method at any time, and it'll instantiate another random object on demand, potentially destroying the previous one if you decide so
CMMRaycastTarget	Add this class to a UI object to have it act as a raycast target without needing an Image component
CMMReadOnlyAttribute
CMMReadOnlyAttributeDrawer
CMMReadOnlyWhenPlayingAttribute
CMMReferencedScriptableObject	Auto-referenced ScriptableObject instances of type T An example usage for ReferenceHolder<T> that can be used with any class type
CMMReferenceHolder
CMMRendererLayerEditor
CMMRendererSortingLayer
CMMReorderableArray
CMMReorderableAttributeAttribute
CMMReorderableList
CMMRequiresConstantRepaintAttribute
CMMRigidbodyCenterOfMass	Add this class to a Rigidbody or Rigidbody2D to be able to edit its center of mass from the inspector directly
CMMRigidbodyInterface	This class acts as an interface to allow the demo levels to work whether the environment (colliders, rigidbodies) are set as 2D or 3D. If you already know for sure that you're going for a 2D or 3D game, I suggest you replace the use of this class with the appropriate classes
CMMRuntimeParticleControl	Add this class to a particle system at runtime, and it'll expose controls to play/pause/stop it from the inspector Because Unity's built-in controls somehow lack pause when in play mode
CMMSaveLoadManagerEncrypter	This class implements methods to encrypt and decrypt streams
CMMSaveLoadManagerMethod	This component, on Awake or on demand, will force a SaveLoadMethod on the MMSaveLoadManager, changing the way it saves data to file. This will impact all classes that use the MMSaveLoadManager (unless they change that method before saving or loading). If you change the method, your previously existing data files won't be compatible, you'll need to delete them and start with new ones
CMMSaveLoadManagerMethodBinary	This save load method saves and loads files as binary files
CMMSaveLoadManagerMethodBinaryEncrypted	This save load method saves and loads files as encrypted binary files
CMMSaveLoadManagerMethodJson
CMMSaveLoadManagerMethodJsonEncrypted
CMMSaveLoadTester	A simple class used in the MMSaveLoadTestScene to test the MMSaveLoadManager class
CMMSaveLoadTestObject	A test object to store data to test the MMSaveLoadManager class
CMMScene	Scene management helpers
CMMSceneLoadingAntiSpill	This helper class, meant to be used by the MMAdditiveSceneLoadingManager, creates a temporary scene to store objects that might get instantiated, and empties it in the destination scene once loading is complete
CMMSceneLoadingImageProgress	A very simple class, meant to be used within a MMSceneLoading screen, to update the fill amount of an Image based on loading progress
►CMMSceneLoadingManager	A class to load scenes using a loading screen instead of just the default API This class used to be known as LoadingSceneManager, and has now been renamed to MMSceneLoadingManager for consistency
CLoadingSceneEvent
CMMSceneLoadingSpeedInterval	A class used to define different interpolation speeds for specific progress intervals
CMMSceneLoadingTextProgress	A very simple class, meant to be used within a MMSceneLoading screen, to update a Text based on loading progress
CMMSceneName	This component, when added on a Text component, will display the name of the level
CMMSceneRestarter	This component lets you restart a scene by pressing a key
CMMSceneViewIcon	Add this class to a gameobject and it'll display its name on the scene view, selected or not
CMMScreenshot	Add this class to an empty game object in your scene and it'll let you take screenshots (meant to be used in Editor)
CMMScreenshotEditor
CMMSelectionBase	Add this component to an object and it'll always get selection in scene view, even if you select one of its children
CMMSerializableDictionary	A serializable dictionary implementation, as Unity still can't serialize Dictionaries natively
CMMSfxEvent	A struct used to trigger sounds
CMMShufflebag	A class to use to get more controlled randomness, taking values out of the bag randomly, and never getting them again
CMMSignal	This class lets you output the value corresponding to one of the basic signal types it contains. Useful to draw basic signal curves
CMMSimpleObjectPooler	A simple object pool outputting a single type of objects
CMMSingleton	Singleton pattern
CMMSliderStep	Add this class to a UI slider and it'll let you trigger events when the cursor moves past a certain step
CMMSMPlaylist
CMMSMPlaylistManager
CMMSMPlaylistSong	A definition of a song, a part of a MMSM Playlist
CMMSoundManager	A simple yet powerful sound manager, that will let you play sounds with an event based approach and performance in mind
CMMSoundManagerAllSoundsControlEvent	This event will let you pause/play/stop/free all sounds playing through the MMSoundManager at once
CMMSoundManagerAudioPool	This class manages an object pool of audiosources
CMMSoundManagerEvent	This event will let you trigger a save/load/reset on the MMSoundManager settings
CMMSoundManagerPlayOptions	A class used to store options for MMSoundManager play
CMMSoundManagerSettings	This class stores MMSoundManager settings and lets you tweak them from the MMSoundManagerSettingsSO's inspector
CMMSoundManagerSettingsSO	A class to save sound settings (music on or off, sfx on or off)
CMMSoundManagerSound	A simple struct used to store information about the sounds played by the MMSoundManager
CMMSoundManagerSoundControlEvent	An event used to control a specific sound on the MMSoundManager. You can either search for it by ID, or directly pass an audiosource if you have it
CMMSoundManagerSoundFadeEvent	This event will let you pause
CMMSoundManagerSoundPlayEvent	This event will let you play a sound on the MMSoundManager
CMMSoundManagerTrackEvent	This feedback will let you mute, unmute, play, pause, stop, free or set the volume of a selected track
CMMSoundManagerTrackFadeEvent	This event will let you order the MMSoundManager to fade an entire track's sounds' volume towards the specified FinalVolume
CMMSoundManagerTrackVolumeSlider	You can add this class to a slider in your UI and it'll let you control a target Track volume via the MMSoundManager
CMMSpawnAroundProperties	This class is used to describe spawn properties, to be used by the MMSpawnAround class. It's meant to be exposed and used by classes that are designed to spawn objects, typically loot systems
CMMSpawnAroundTester	A tester class used to show how the MMSpawnAround class can be used
CMMSpeedTestItem	A struct to store data associated to speed tests
CMMSpriteMask	This class will automatically look for sprite renderers, particle systems, tilemaps in the scene, and change their SpriteMaskInteraction settings according to the one set in the inspector Use the NoMask tag on objects you don't want automatically setup
CMMSpriteMaskEvent	An event type used to set a new size for the mask from any class
CMMSquashAndStretch	This component will automatically update scale and rotation Put it one level below the top, and have the model one level below that Hierarchy should be as follows :
CMMStateChangeEvent
CMMStateMachine	StateMachine manager, designed with simplicity in mind (as simple as a state machine can be anyway). To use it, you need an enum. For example : public enum CharacterConditions { Normal, ControlledMovement, Frozen, Paused, Dead } Declare it like so : public StateMachine<CharacterConditions> ConditionStateMachine; Initialize it like that : ConditionStateMachine = new StateMachine<CharacterConditions>(); Then from anywhere, all you need to do is update its state when needed, like that for example : ConditionStateMachine.ChangeState(CharacterConditions.Dead); The state machine will store for you its current and previous state, accessible at all times, and will also optionnally trigger events on enter/exit of these states
CMMStayInPlace	This class forces a transform to stay at a fixed position, rotation and/or scale
CMMStopMotionAnimation
CMMSwipeEvent	An event usually triggered when a swipe happens. It contains the swipe "base" direction, and detailed information if needed (angle, length, origin and destination
CMMSwipeZone	Add a swipe manager to your scene, and it'll trigger MMSwipeEvents everytime a swipe happens. From its inspector you can determine the minimal length of a swipe. Shorter swipes will be ignored
CMMTilemap	A collection of helper methods for interacting with Tilemaps
CMMTilemapBoolean
CMMTilemapCleaner	A super simple component you can add to a tilemap to get a button to clean it from all tiles
CMMTilemapGenerator	This class will fill a tilemap with the data generated by the combination of its layers
CMMTilemapGeneratorEditor	Custom editor for the MMTilemapGenerator, handles generate button and reorderable layers
►CMMTilemapGeneratorLayer	A class used to store and edit the data of MMTilemapGenerator layers, which you can use and combine to generate unique and random grids
CMMTilemapGeneratorLayerSafeSpot	A struct used to store safe spots dimensions
CMMTilemapGeneratorLayerList	A class used to display a reoderable list of MMTilemapGeneratorLayers
CMMTilemapGridRenderer
CMMTilemapShadow	A class to put on a tilemap so it acts as a shadow/copy of another reference tilemap. Useful for wall shadows for example. Offsetting the tilemap and changing its sorting order etc is done via the regular components
CMMTime	Time helpers
CMMTimedActivation	Add this component to an object and it'll be auto destroyed X seconds after its Start()
CMMTimedDestruction	Add this component to an object and it'll be auto destroyed X seconds after its Start()
CMMToggleActive	This very simple class simply exposes a method to toggle the GameObject it's on (or a target one if left empty in the inspector) active or inactive
CMMTouchAxis	Add this component to a GUI Image to have it act as an axis. Bind pressed down, pressed continually and released actions to it from the inspector Handles mouse and multi touch
CMMTouchButton	Add this component to a GUI Image to have it act as a button. Bind pressed down, pressed continually and released actions to it from the inspector Handles mouse and multi touch
CMMTouchControls
CMMTouchFollowerJoystick	Add this component to a UI rectangle and it'll act as a detection zone for a follower joystick. Note that this component extends the MMTouchJoystick class so you don't need to add another joystick to it. It's both the detection zone and the stick itself
CMMTouchJoystick	Joystick input class. In charge of the behaviour of the joystick mobile touch input. Bind its actions from the inspector Handles mouse and multi touch
CMMTouchRepositionableJoystick	Add this component to a UI rectangle and it'll act as a detection zone for a joystick. Note that this component extends the MMTouchJoystick class so you don't need to add another joystick to it. It's both the detection zone and the stick itself
CMMTrailRendererLayerEditor
CMMTrailRendererSortingLayer
CMMTransformRandomizer	Add this component to an object to randomize its position/rotation/scale on demand or automatically
CMMTransformRandomizerEditor	Custom editor for the MMTransformRandomizer class
CMMTriggerAndCollision
CMMTriggerAndCollisionEditor
CMMTriggerAndCollisionFilter
CMMTriggerFilter
CMMTween	The formulas described here are (loosely) based on Robert Penner's easing equations http://robertpenner.com/easing/
CMMTweenDefinitions
CMMTweenType
CMMTweenTypeDrawer
CMMTwoSidedUI	This class lets you define an axis on which to flip a "two sided" UI element (made of two separate and usually aligned objects, effectively turning each side on/off everytime the container's scale goes above/below a certain threshold
CMMUIFollowMouse	This component will let you have a UI object follow the mouse position
CMMVectorAttribute
CMMVectorLabelsAttributeDrawer
CMMViewportEdgeTeleporter	Add this class to an object and it will automatically teleport to the other end of the screen when reaching the screen's edges
CMMVisibleParticle	Adds this class to particles to force their sorting layer
CMonoAttribute
CObjectBoundsEditor
CPlatformBindings	A class used to store bindings
CProgressEvent
CRagdollBodyPart	A class used to store ragdoll body parts informations
CRatio	A class to store ratio display info
CReorderableDrawer
CSceneViewIconEditor	This class adds names for each LevelMapPathElement next to it on the scene view, for easier setup
CSelectionBase	Add this component to an object and it'll always get selection in scene view, even if you select one of its children
CSerializedMMAchievement	A serializable class used to store an achievement into a save file
CSerializedMMAchievementManager	Serializable MM achievement manager
CShaderController	A class used to control a float in any other class, over time To use it, simply drag a monobehaviour in its target field, pick a control mode (ping pong or random), and tweak the settings
CShaderControllerEditor	Custom editor for the ShaderController, conditional hiding
CSwipeEvent
CTransformController	A simple class used to control properties on a transform
►NTopDownEngine
CAchievementRules	This class describes how the Top Down Engine demo achievements are triggered. It extends the base class MMAchievementRules It listens for different event types
CAIActionAimObject	An AIACtion used to aim any object in the direction of the AI's movement or aim
CAIActionAimWeaponAtMovement	Aims the weapon at the current movement when not shooting
CAIActionAimWeaponAtTarget2D	Aims the weapon at the current target
CAIActionAimWeaponAtTarget3D	Aims the weapon at the current target, in a 3D context
CAIActionChangeWeapon	This action is used to force your character to switch to another weapon. Just drag a weapon prefab into its NewWeapon slot and you're good to go
CAIActionCrouchStart	This action forces the character to crouch if it can
CAIActionCrouchStop	This action forces the character to stop crouching if it can
CAIActionDoNothing	As the name implies, an action that does nothing. Just waits there
CAIActionFaceTowardsTarget2D	This AI Action will let an agent with a CharacterOrientation2D ability face its target
CAIActionInvertPatrolDirection	Inverts the direction of a patrol on PerformAction
CAIActionMMFeedbacks	This action is used to play a MMFeedbacks
CAIActionMoveAwayFromTarget2D	Requires a CharacterMovement ability. Makes the character move away from the target
CAIActionMoveAwayFromTarget3D	Requires a CharacterMovement ability. Makes the character move away from the target, up to the specified MaximumDistance
CAIActionMovePatrol2D	This Action will make the Character patrol along the defined path (see the MMPath inspector for that) until it hits a wall or a hole while following a path
CAIActionMovePatrol3D	This Action will make the Character patrol along the defined path (see the MMPath inspector for that) until it hits a wall or a hole while following a path
CAIActionMoveRandomly2D	Requires a CharacterMovement ability. Makes the character move randomly, until it finds an obstacle in its path, in which case it'll pick a new direction at random
CAIActionMoveRandomly3D	Requires a CharacterMovement ability. Makes the character move randomly, until it finds an obstacle in its path, in which case it'll pick a new direction at random
CAIActionMoveRandomlyGrid	Requires a CharacterGridMovement ability. Makes the character move randomly in the grid, until it finds an obstacle in its path, in which case it'll pick a new direction at random Supports both 2D and 3D grids
CAIActionMoveTowardsTarget2D	Requires a CharacterMovement ability. Makes the character move up to the specified MinimumDistance in the direction of the target
CAIActionMoveTowardsTarget3D	Requires a CharacterMovement ability. Makes the character move up to the specified MinimumDistance in the direction of the target
CAIActionPathfinderToPatrol3D	This action will make the character pathfind its way back to its last patrol point
CAIActionPathfinderToTarget3D	Requires a CharacterMovement ability. Makes the character move up to the specified MinimumDistance in the direction of the target
CAIActionReload	An AIACtion used to request a reload on the weapon
CAIActionResetTarget	An Action that will set the target to null, resetting it
CAIActionRotateConeOfVision2D	This AIAction will rotate this AI's ConeOfVision2D either towards the AI's movement or its weapon aim direction
CAIActionRotateTowardsTarget2D	This AI Action will let an agent with a CharacterRotation2D ability (set to ForcedRotation:true) rotate to face its target
CAIActionRotateTowardsTarget3D
CAIActionRunStart	An AIACtion used to have an AI start running
CAIActionRunStop	An AIACtion used to have an AI stop running
CAIActionSelfDestruct	An AIACtion used to have an AI kill itself
CAIActionSetLastKnownPositionAsTarget	An Action that will set the last known position of the target as the new Target
CAIActionSetPlayerAsTarget	An AIACtion used to set the current Player character as the target
CAIActionSetTransformAsTarget	An AIACtion used to set a specified Transform as the target
CAIActionShoot2D	An Action that shoots using the currently equipped weapon. If your weapon is in auto mode, will shoot until you exit the state, and will only shoot once in SemiAuto mode. You can optionnally have the character face (left/right) the target, and aim at it (if the weapon has a WeaponAim component)
CAIActionShoot3D	An Action that shoots using the currently equipped weapon. If your weapon is in auto mode, will shoot until you exit the state, and will only shoot once in SemiAuto mode. You can optionnally have the character face (left/right) the target, and aim at it (if the weapon has a WeaponAim component)
CAIActionSwapBrain	This simple action lets you swap the brain of an AI at runtime, for a new brain, specified in the inspector
CAIActionUnityEvents	This action is used to trigger a UnityEvent
CAIDecisionDetectTargetConeOfVision2D	This Decision will return true if its MMConeOfVision has detected at least one target, and will set it as the Brain's target
CAIDecisionDetectTargetConeOfVision3D	This Decision will return true if its MMConeOfVision has detected at least one target, and will set it as the Brain's target
CAIDecisionDetectTargetLine2D	This Decision will return true if any object on its TargetLayer layermask enters its line of sight. It will also set the Brain's Target to that object. You can choose to have it in ray mode, in which case its line of sight will be an actual line (a raycast), or have it be wider (in which case it'll use a spherecast). You can also specify an offset for the ray's origin, and an obstacle layer mask that will block it
CAIDecisionDetectTargetLine3D	This Decision will return true if a target is found in a ray or boxcast in the specified direction
CAIDecisionDetectTargetRadius2D	This decision will return true if an object on its TargetLayer layermask is within its specified radius, false otherwise. It will also set the Brain's Target to that object
CAIDecisionDetectTargetRadius3D	This decision will return true if an object on its TargetLayer layermask is within its specified radius, false otherwise. It will also set the Brain's Target to that object
CAIDecisionDistanceToTarget	This Decision will return true if the current Brain's Target is within the specified range, false otherwise
CAIDecisionGrounded	This decision will return true if the character is grounded, false otherwise
CAIDecisionHealth	This decision will return true if the specified Health conditions are met. You can have it be lower, strictly lower, equal, higher or strictly higher than the specified value
CAIDecisionHit	This decision returns true if the Character got hit this frame, or after the specified number of hits has been reached
CAIDecisionLineOfSightToTarget2D	This decision returns true if there's no obstacle in a straight line between the agent and the brain's target, in 2D
CAIDecisionLineOfSightToTarget3D	This decision returns true if there's no obstacle in a straight line between the agent and the brain's target, in 3D
CAIDecisionNextFrame	This decision will return true when entering the state this Decision is on
CAIDecisionRandom	This decision will roll a dice and return true if the result is below or equal the Odds value
CAIDecisionReloadNeeded	This Decision will return true if a reload is needed
CAIDecisionTargetFacingAI2D	This decision will return true if the Brain's current target is facing this character. Yes, it's quite specific to Ghosts. But hey now you can use it too!
CAIDecisionTargetIsAlive	This decision will return true if the Brain's current target is alive, false otherwise
CAIDecisionTargetIsNull	This decision will return true if the Brain's current target is null, false otherwise
CAIDecisionTimeInState	This decision will return true after the specified duration, picked randomly between the min and max values (in seconds) has passed since the Brain has been in the state this decision is in. Use it to do something X seconds after having done something else
CAIDecisionTimeSinceStart	This decision will return true after the specified duration (in seconds) has passed since the level was loaded
CAimMarker	A class used to handle aim markers, (usually circular) visual elements
CAmmoDisplay	A class that combines a progress bar and a text display and that can be used to display the current ammo level of a weapon
CAppearDisappear	Add this class to an object (usually a platform but it could be anything really) to have it run on an appearing/disappearing loop, like the appearing platforms in Megaman for example
CAutoBindAutoFocus
CAutoPickItem
CAutoRespawn	Add this script to an object and it will automatically be reactivated and revived when the player respawns
CBackgroundMusic	Add this class to a GameObject to have it play a background music when instanciated
CBomb	A basic melee weapon class, that will activate a "hurt zone" when the weapon is used
CBouncyProjectile	Projectile class that will bounce off walls instead of exploding on impact
CButtonActivated	Extend this class to activate something when a button is pressed in a certain zone
CButtonActivatedZone	Add this component to a collider 2D and you'll be able to have it perform an action on enter/exit and while staying
CButtonActivator
CButtonPrompt
CCharacter	This class will pilot the TopDownController component of your character. This is where you'll implement all of your character's game rules, like jump, dash, shoot, stuff like that. Animator parameters : Grounded (bool), xSpeed (float), ySpeed (float), CollidingLeft (bool), CollidingRight (bool), CollidingBelow (bool), CollidingAbove (bool), Idle (bool) Random : a random float between 0 and 1, updated every frame, useful to add variance to your state entry transitions for example RandomConstant : a random int (between 0 and 1000), generated at Start and that'll remain constant for the entire lifetime of this animator, useful to have different characters of the same type
CCharacterAbility	A class meant to be overridden that handles a character's ability
CCharacterAbilityInspector	Adds custom labels to the Character inspector
CCharacterAbilityNodeSwap	This ability lets you swap entire ability nodes for the ones set in parameters
CCharacterAbilityTypePair
CCharacterAnimationFeedbacks	This class can be used to trigger feedbacks from an animator, typically used to trigger footstep particles and/or sounds
CCharacterAnimationParametersInitializer
CCharacterButtonActivation	Add this component to a character and it'll be able to activate button zones Animator parameters : Activating (bool)
CCharacterConeOfVision	An ability that casts a cone of vision around the character
CCharacterCrouch	This ability allows the character to "crouch" when pressing the crouch button, which resizes the collider
CCharacterDamageDash2D
CCharacterDamageDash3D
CCharacterDash2D	Add this ability to a character and it'll be able to dash in 2D, covering a certain distance in a certain duration
CCharacterDash3D	Add this ability to a 3D character and it'll be able to dash (cover the specified distance in the specified time)
CCharacterDetector	Add this class to a TRIGGER collider2D and it'll let you know when a character enters it and will let you trigger actions in consequence
CCharacterDirectionMarker	This ability lets you orient an object towards either the movement direction or aim direction of your character That object can be anything you want (a sprite, a model, a line, etc)
CCharacterDisableIKOnReload
CCharacterFallDownHoles2D	Add this component to a character and it'll make your character fall down holes in 2D
CCharacterGridMovement	Add this ability to a Character to have it move on a grid. This will require a GridManager be present in your scene DO NOT use that component and a CharacterMovement component on the same character
CCharacterHandleSecondaryWeapon	Add this class to a character so it can use weapons Note that this component will trigger animations (if their parameter is present in the Animator), based on the current weapon's Animations Animator parameters : defined from the Weapon's inspector
CCharacterHandleWeapon	Add this class to a character so it can use weapons Note that this component will trigger animations (if their parameter is present in the Animator), based on the current weapon's Animations Animator parameters : defined from the Weapon's inspector
CCharacterInspector	Adds custom labels to the Character inspector
CCharacterInventory	Add this component to a character and it'll be able to control an inventory Animator parameters : none
CCharacterJump2D	Add this ability to a character and it'll be able to jump in 2D. This means no actual movement, only the collider turned off and on. Movement will be handled by the animation itself
CCharacterJump3D	This ability will allow a character to jump in 3D
CCharacterMovement	Add this ability to a Character to have it handle ground movement (walk, and potentially run, crawl, etc) in x and z direction for 3D, x and y for 2D Animator parameters : Speed (float), Walking (bool)
CCharacterOrientation2D	Add this ability to a character and it'll rotate or flip to face the direction of movement or the weapon's, or both, or none Only add this ability to a 2D character
CCharacterOrientation3D	Add this ability to a character, and it'll be able to rotate to face the movement's direction or the weapon's rotation
CCharacterPathfinder3D	Add this class to a 3D character and it'll be able to navigate a navmesh (if there's one in the scene of course)
CCharacterPathfindToMouse3D	This ability, used on a Player character, will let you click on the ground and have the character move to the click's position You'll find a demo of this ability on the LoftSuspendersMouseDriven demo character. You can drag it in the Loft3D demo scene's LevelManager's PlayerPrefabs slot to give it a try. For AIs, look at the MousePathfinderAI3D script instead, and its demo in the MinimalPathfinding3D demo scene
CCharacterPause	Add this component to a character and it'll be able to activate/desactivate the pause
CCharacterPersistence	Add this component to a Character and it'll persist with its exact current state when transitioning to a new scene. It'll be automatically passed to the new scene's LevelManager to be used as this scene's main character. It'll keep the exact state all its components are in at the moment they finish the level. Its health, enabled abilities, component values, equipped weapons, new components you may have added, etc, will all remain once in the new scene. Animator parameters : None
CCharacterPush3D	Add this ability to a Character to have it be able to push rigidbodies around Animator parameters : Pushing (bool)
CCharacterRagdollOnDeath	Add this to a character and it'll trigger its MMRagdoller to ragdoll on death
CCharacterRotateCamera	An ability that will let the Character rotate its associated camera, using the PlayerID_CameraRotationAxis input axis
CCharacterRotation2D	Add this ability to a character and it'll rotate or flip to face the direction of movement or the weapon's, or both, or none Only add this ability to a 2D character
CCharacterRun	Add this component to a character and it'll be able to run Animator parameters : Running
CCharacterSelector	Add this component to a button (for example) to be able to store a selected character, and optionally to go to another scene You can see an example of its use in the DeadlineCharacterSelection demo scene
CCharacterStates	The various states you can use to check if your character is doing something at the current frame
CCharacterStun	Add this component to a character and it'll be able to be stunned. To stun a character, simply call its Stun or StunFor methods. You'll find test buttons at the bottom of this component's inspector. You can also use StunZones to stun your characters. Animator parameters : Stunned (bool)
►CCharacterSurfaceSounds	Add this component to a character and it'll let you define a number of surfaces and associate walk and run sounds to them It will also let you trigger events when entering or exiting these surfaces Important : Surfaces are evaluated from top to bottom. The first surface definition that matches the current detected ground will be considered the current surface. So make sure your order them accordingly
CCharacterSurfaceSoundsItems
CCharacterSwap	Add this ability to a Character and it'll be part of a pool of characters in a scene to swap from. You'll need a CharacterSwapManager in your scene for this to work
CCharacterSwapManager	Add this class to an empty component in your scene, and it'll allow you to swap characters in your scene when pressing the SwapButton (P, by default) Each character in your scene will need to have a CharacterSwap class on it, and the corresponding PlayerID. You can see an example of such a setup in the MinimalCharacterSwap demo scene
CCharacterSwitchManager	Add this component to an empty object in your scene, and when you'll press the SwitchCharacter button (P by default, change that in Unity's InputManager settings), your main character will be replaced by one of the prefabs in the list set on this component. You can decide the order (sequential or random), and have as many as you want. Note that this will change the whole prefab, not just the visuals. If you're just after a visual change, look at the CharacterSwitchModel ability. If you want to swap characters between a bunch of characters within a scene, look at the CharacterSwap ability and CharacterSwapManager
CCharacterSwitchModel	Add this component to a character and it'll be able to switch its model when pressing the SwitchCharacter button Note that this will only change the model, not the prefab. Only the visual representation, not the abilities and settings. If instead you'd like to change the prefab entirely, look at the CharacterSwitchManager class. If you want to swap characters between a bunch of characters within a scene, look at the CharacterSwap ability and CharacterSwapManager
CCharacterTank
CCharacterTimeControl	Add this ability to a character, and it'll be able to control time when pressing the TimeControl button
CChargeWeapon	Add this component to an object and it'll let you define a sequence of charge steps, each triggering their own unique weapon, complete with options like input modes or conditional releases, hooks for every steps, and more. Useful for Megaman or Zelda like types of charge weapons
CChargeWeaponStep	A class used to store the charge properties of the weapons that together make up a charge weapon Each charge weapon is made of multiple of these, each representing a step in the charge sequence
CCheckPoint	Checkpoint class. Will make the player respawn at this point if it dies
CCheckPointEvent	An event to trigger when a checkpoint is reached
CCinemachineBrainController	This class is designed to control CinemachineBrains, letting you control their default blend values via events from any class
CCinemachineCameraController	A class that handles camera follow for Cinemachine powered cameras
CCoin	Coin manager
CComboWeapon	Add this component to an object containing multiple weapons and it'll turn it into a ComboWeapon, allowing you to chain attacks from all the different weapons
CCrouchZone	Add this zone to a trigger collider and it'll automatically trigger a crouch on your 3D character on entry
CDamageOnTouch	Add this component to an object and it will cause damage to objects that collide with it
CDamageOverTimeInterrupter	Use this picker to interrupt all damage of the specified type on the character that picks it
CDamageResistance	Used by the DamageResistanceProcessor, this class defines the resistance versus a certain type of damage
CDamageResistanceProcessor	Link this component to a Health component, and it'll be able to process incoming damage through resistances, handling damage reduction/increase, condition changes, movement multipliers, feedbacks and more
CDamageType	A scriptable object you can create assets from, to identify damage types
CDashZone3D	Add this zone to a trigger collider and it'll automatically trigger a dash on your 3D character on entry
CDeadlineAvatar
CDeadlineCollectible	This class is used in the Deadline demos to mark collectibles and disable them if they've been collected in a past visit of the level
CDeadlineDoor
CDeadlineFinishLevel	A Deadline demo dedicated class that will load the next level
CDeadlineLevelSelectionButton	A class to handle the display of levels in the Deadline demo level selector
CDeadlineProgress	A serializable entity used to store progress : a list of scenes with their internal status (see above), how many lives are left, and how much we can have
CDeadlineProgressManager	The DeadlineProgressManager class acts as an example of how you can implement progress management in your game. There's no general class for that in the engine, for the simple reason that no two games will want to save the exact same things. But this should show you how it's done, and you can then copy and paste that into your own class (or extend this one, whatever you prefer)
CDeadlineScene	A serializable entity to store deadline demo scenes, whether they've been completed, unlocked, how many stars can and have been collected
CDeadlineStar	A pickable star, that triggers an event if picked, and disables itself if it's been previously collected
CDeadlineStartMenuButton
►CDependencyInstaller
CAfterImport
CDefineSymbol
CDialogueBox	Dialogue box class. Don't add this directly to your game, look at DialogueZone instead
CDialogueElement	A class used to store dialogue lines info
CDialogueZone	Add this class to an empty component. It requires a Collider or Collider2D, set to "is trigger". You can then customize the dialogue zone through the inspector
CDoor3D	A class to handle the 3D doors in the Loft demo
CDungeonDoor	A class used in the Koala demo to handle the dungeon doors
CDungeonPortal	A class used in the Koala demo to emit particles if a spawner is active and stop them otherwise
CExplodudesBomb	A class used in the Explodudes demo scene to handle the exploding bombs
CExplodudesBombPicker	Coin manager
CExplodudesCrate	A class that modifies the y scale of crates in the Explodudes demo scene
CExplodudesDecoration	A decorative class used to make background elements jump
CExplodudesMultiplayerLevelManager	An example class of how you can extend the MultiplayerLevelManager to implement your own specific rules. This one's rules are as follows :
CExplodudesStartScreen	This class handles the startscreen of the Explodudes demo scene
CExplodudesWeapon	This class handles the dropping of bombs by characters in the Explodudes demo scene
CExplodudesWinnerScreen	This class handles the display of a winner screen in the Explodudes demo scene
CFallingPlatform2D	Add this script to a platform and it'll fall down when walked upon by a playable character Add an AutoRespawn component to your platform and it'll get reset when your character dies
CFallingPlatform3D	Add this script to a platform and it'll fall down when walked upon by a playable character Add an AutoRespawn component to your platform and it'll get reset when your character dies
CFinishLevel	Add this class to a trigger and it will send your player to the next level
CGameManager	The game manager is a persistent singleton that handles points and time
CGoToLevelEntryPoint	A class used to go from one level to the next while specifying an entry point in the target level. Entry points are defined in each level's LevelManager component. They're simply Transforms in a list. The index in the list is the identifier for the entry point
CGrasslandHUD
►CGrasslandsMultiplayerLevelManager	An example class of how you can extend the MultiplayerLevelManager to implement your own specific rules. This one's rules are as follows :
CGrasslandPoints	A struct used to store points for each player
CGridManager	A manager required in your scenes that use CharacterGridMovement
CGUIManager	Handles all GUI effects and changes
►CHealth	This class manages the health of an object, pilots its potential health bar, handles what happens when it takes damage, and what happens when it dies
CInterruptiblesDamageOverTimeCoroutine
CHealthAutoRefill	Add this class to a character or object with a Health class, and its health will auto refill based on the settings here
CHealthChangeEvent	An event triggered every time health values change, for other classes to listen to
CHitscanWeapon
CInputManager	This persistent singleton handles the inputs and sends commands to the player. IMPORTANT : this script's Execution Order MUST be -100. You can define a script's execution order by clicking on the script's file and then clicking on the Execution Order button at the bottom right of the script's inspector. See https://docs.unity3d.com/Manual/class-ScriptExecution.html for more details
CInputSystemManager	This is a replacement InputManager if you prefer using Unity's InputSystem over the legacy one. Note that it's not the default solution in the engine at the moment, because older versions of Unity don't support it, and most people still prefer not using it You can see an example of how to set it up in the MinimalScene3D_InputSystem demo scene
CInputSystemManagerBase	Agnostic version of the InputSystemManager that lets you define a set of input actions to read from
CInputSystemManagerEventsBased	This is a replacement InputManager if you prefer using Unity's InputSystem over the legacy one, in a multiplayer context. Note that it's not the default solution in the engine at the moment, because older versions of Unity don't support it, and most people still prefer not using it You can see an example of how to set it up in the MinimalScene3D_InputSystem_Multiplayer demo scene
CInventoryEngineChest	Add this component to an object in your scene to have it act like a chest. You'll need a key operated zone to open it, and item picker(s) on it to fill its contents
CInventoryEngineHealth	Pickable health item
CInventoryEngineKey	Pickable key item
CInventoryPickableItem	An item picker that instantiates an effect and plays a sound on pick
CInventoryWeapon	Weapon item in the TopDown Engine
CKeyOperatedZone	Add this component to a collider 2D and you'll be able to have it perform an action when a character equipped with the specified key enters it
CKillsManager
CKillZone	Add this component to an object and it will cause damage to objects that collide with it
CLevelLimits	Add this class to a boxcollider to signify the bounds of your level
CLevelManager	Spawns the player, handles checkpoints and respawn
CLevelSelector	This component allows the definition of a level that can then be accessed and loaded. Used mostly in the level map scene
CLoot	A class meant to spawn objects (usually item pickers, but not necessarily) The spawn can be triggered by any script, at any time, and comes with automatic hooks to trigger loot on damage or death
CMagnetic
CMagneticEnabler	This object will enable Magnetic objects in your scene when they enter its associated collider2D (make sure you add one). While magnetic objects can work on their own, and handle their own range detection, you can also use a different architecture, where an enabler makes them move. A typical use case would be to add it to a character, nested under its top level :
CMeleeWeapon	A basic melee weapon class, that will activate a "hurt zone" when the weapon is used
CMMCameraEvent
CMMCharacterEvent	MMCharacterEvents are used in addition to the events triggered by the character's state machine, to signal stuff happening that is not necessarily linked to a change of state
CMMCinemachineBrainEvent	An event used to interact with camera brains
CMMDamageTakenEvent	An event fired when something takes damage
CMMF_TopDownEngineEvent	This feedback lets you trigger TopDown Engine Events, that can then be caught by other classes
CMMF_TopDownEngineFloatingText	This feedback lets you trigger the appearance of a floating text, that will reflect the damage done to the target Health component. This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own
CMMFeedbackTopDownEngineFloatingText	This feedback lets you trigger the appearance of a floating text, that will reflect the damage done to the target Health component. This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own
CMMLifeCycleEvent
CMouseDrivenPathfinderAI3D	A class to add on a CharacterPathfinder3D equipped character. It will allow you to click anywhere on screen, which will determine a new target and the character will pathfind its way to it
►CMovementZone	Add this class to a trigger collider and it will let you apply a movement speed multiplier to characters entering it
CMovementZoneCollidingEntity	A class used to store a movement zone's settings
CMovingPlatform2D	A class to handle a platform that moves in 2D along a set of nodes
CMovingPlatform3D	A class to handle a moving platform in 3D space, moving along a set of nodes
CMultiplayerCameraGroupTarget	Automatically grabs a Cinemachine camera group and assigns LevelManager's players on load and makes a Cinemachine Virtual Camera follow that target
CMultiplayerGUIManager
CMultiplayerLevelManager	A generic level manager meant to handle multiplayer scenes (specifically spawn and camera modes It's recommended to extend it to implement your own specific gameplay rules
CMultiplayerSplitCameraRig	This class handles a X-players split screen setup
CMusicSwitch
CPackageInstallation
CPathedProjectile	This class handles the movement of a pathed projectile
CPathedProjectileSpawner	Spawns pathed projectiles
CPauseButton	A simple component meant to be added to the pause button
CPersistentBackgroundMusic	Add this class to a GameObject to have it play a background music when instanciated. Careful : only one background music will be played at a time
CPhysicsProjectile	Use this class for physics based projectiles (meant to be thrown by a ProjectileWeapon)
CPickableAbility	Add this class to an object with a trigger box collider 2D, and it'll become a pickable object, able to permit or forbid an ability on a Character
CPickableAbilityInspector
CPickableAction	Add this class to an object and it'll trigger the specified actions on pick
CPickableDamageResistance	Use this picker to create a new resistance on the character that picks it, or to enable/disable an existing one
CPickableDash2D	This class is an example of how you can create pickable abilities, items that, when picked, enable an ability on the picking character. This example will permit the CharacterDash2D ability. You can of course create more items like this for any other ability
CPickableItem	A simple class, meant to be extended, that will handle all the mechanics of a pickable thing : feedbacks, collision, pick consequences, etc
CPickableItemEvent	An event typically fired when picking an item, letting listeners know what item has been picked
CPickableWeapon	Add this class to a collectible to have the player change weapon when collecting it
CPointsOfEntryStorage	A class to store points of entry into levels, one per level
CProjectile	Projectile class to be used along with projectile weapons
CProjectileWeapon	A weapon class aimed specifically at allowing the creation of various projectile weapons, from shotgun to machine gun, via plasma gun or rocket launcher
CProximityManaged	A class to add to any object in your scene to mark it as managed by a proximity manager
CProximityManager	A class that looks for objects with a ProximityManaged class on them, and enables/disables them based on their settings. This class is meant as an example of how you can deal with large scenes with a lot of objects, disabling the ones that are far away from the action to save on performance. Note that there are many ways to do it, this one is simple and generic, there may be better choices for your specific use case
CProximityMine	Add this class to a collider (2D or 3D) and it'll let you trigger things after a duration, like a mine would. It also comes with options to interrupt or reset the timer on exit
CPusherProjectile3D	Add this component to a projectile (in 3D) and it'll be able to push stuff (opening doors for example)
CRespawnable	Interface for player respawn
CRoom	This class lets you define the boundaries of rooms in your level. Rooms are useful if you want to cut your level into portions (think Super Metroid or Hollow Knight for example). These rooms will require their own virtual camera, and a confiner to define their size. Note that the confiner is different from the collider that defines the room. You can see an example of rooms in action in the KoalaRooms demo scene
CRoomEditor	Custom editor for Rooms that draws their name in scene view
CSfxSwitch
CSoundManager	This persistent singleton handles sound playing
CSoundSettings	a class to save sound settings (music on or off, sfx on or off)
CStar	A pickable star, that triggers a TopDownEngineStarEvent if picked It's up to you to implement something that will handle that event. You can look at the DeadlineStar and DeadlineProgressManager for examples of that
CStartScreen	Simple start screen class
CStimpack	A Stimpack / health bonus, that gives health back when picked
CStunZone	A stun zone will stun any character with a CharacterStun ability entering it
CSurfaceModifier	Add this component to a platform and define its new friction or force which will be applied to any TopDownController that walks on it TODO, still work in progress
CSwitch	Switches can be used to trigger actions based on their current state (on or off). Useful to open doors, chests, portals, bridges..
CTeleporter	Add this script to a trigger collider2D or collider to teleport objects from that object to its destination
CTeleporterEditor	Custom editor for Teleporters that draws their name in scene view
CThrownObject	A thrown object type of projectile, useful for grenades and such
CTilemapLevelGenerator	This component, added on an empty object in your level will handle the generation of a unique and randomized tilemap
CTimedSpawner	A class meant to be used in conjunction with an object pool (simple or multiple) to spawn objects regularly, at a frequency randomly chosen between the min and max values set in its inspector
CTimeZone	Add this class to a trigger and it will allow you to modify the time scale when entering it, for the specified duration and settings
CTopDownCharacterAnimationParameter	A struct used to store character animation parameter definitions, to be used by the CharacterAnimationParametersInitializer class
CTopDownCinemachineZone2D	Add this class to a box collider 2D and it'll let you define a zone that, when entered, enables a virtual camera, letting you define sections inside your level easily
CTopDownCinemachineZone3D	Add this class to a box collider and it'll let you define a zone that, when entered, enables a virtual camera, letting you define sections inside your level easily
CTopDownController	Do not use this class directly, use TopDownController2D for 2D characters, or TopDownController3D for 3D characters Both of these classes inherit from this one
CTopDownController2D	a controller to move a rigidbody2D and collider2D around in top down view
CTopDownController3D	A controller, initially adapted from Unity's CharacterMotor.js, to add on top of Unity's native CharacterController, that will handle
CTopDownEngineEvent	A type of events used to signal level start and end (for now)
►CTopDownEngineInputActions
CIPlayerControlsActions
CPlayerControlsActions
CTopDownEnginePointEvent	A type of event used to signal changes to the current score
CTopDownEngineStarEvent
CTopDownMonoBehaviour	The TopDownMonoBehaviour class is a base class for all TopDownEngine classes. It doesn't do anything, but ensures you have a single point of change should you want your classes to inherit from something else than a plain MonoBehaviour A frequent use case for this would be adapting scripts
CTypedDamage	A class used to store and define typed damage impact : damage caused, condition or movement speed changes, etc
CWeapon	This base class, meant to be extended (see ProjectileWeapon.cs for an example of that) handles rate of fire (rate of use actually), and ammo reloading
CWeaponAim
CWeaponAim2D	Add this component to a Weapon and you'll be able to aim it (meaning you'll rotate it) Supported control modes are mouse, primary movement (you aim wherever you direct your character) and secondary movement (using a secondary axis, separate from the movement)
CWeaponAim3D	Add this component to a Weapon and you'll be able to aim it (meaning you'll rotate it) Supported control modes are mouse, primary movement (you aim wherever you direct your character) and secondary movement (using a secondary axis, separate from the movement)
CWeaponAimMouseOverride	Add this component to a WeaponAim, and it'll automatically handle switching its weapon aim control mode to mouse if mouse becomes active. If you then touch any of the gamepad axis again, it'll switch back aim control to it. The WeaponAim control mode needs to be initially set to a gamepad control mode
CWeaponAmmo
CWeaponAutoAim	An abstract class, meant to be extended for 2D and 3D specifics, handling the basics of auto aim. Extended components should be placed on a weapon with an aim component
CWeaponAutoAim2D	The 2D version of the WeaponAutoAim, meant to be used on objects equipped with a WeaponAim2D. It'll detect targets within the defined radius, pick the closest, and force the WeaponAim component to aim at them if a target is found
CWeaponAutoAim3D	The 3D version of the WeaponAutoAim, meant to be used on objects equipped with a WeaponAim3D. It'll detect targets within the defined radius, pick the closest, and force the WeaponAim component to aim at them if a target is found
CWeaponAutoAimRadiusCircle	This class will automatically draw a circle to match the radius of the auto aim weapon if there's one
CWeaponAutoShoot	Adds this component on a weapon with a WeaponAutoAim (2D or 3D) and it will automatically shoot at targets after an optional delay To prevent/stop auto shoot, simply disable this component, and enable it again to resume auto shoot
CWeaponHandler	A simple component you can use to control a weapon and have it start and stop on demand, without having a character to handle it You can see it in action in the KoalaHealth demo scene, it's powering that demo's cannons
CWeaponIK	This class allows for a 3D character to grab its current weapon's handles, and look wherever it's aiming. There's a bit of setup involved. You need to have a CharacterHandleWeapon component on your character, it needs an animator with IKPass active (this is set in the Layers tab of the animator) the animator's avatar MUST be set as humanoid And you need to put that script on the same gameobject as the animator (otherwise it won't work). Finally, you need to set left and right handles (or only one of these) on your weapon(s)
CWeaponIKDisabler	You can add this class next to a WeaponIK component (so usually on a Character's Animator), and it'll let you disable IK and optionally reparent the WeaponAttachment during certain animations
CWeaponLaserSight	Add this class to a weapon and it'll project a laser ray towards the direction the weapon is facing
CWeaponModel	A class used to force a model to aim at a Weapon's target
CWeaponModelBindings
CWeaponModelEnabler	This class is responsible for enabling/disabling the visual representation of weapons, if they're separated from the actual weapon object
CWeaponPreventShooting	An abstract class used to define additional conditions on a weapon to prevent it from firing
CWeaponPreventShootingWhenCloseToWalls2D	Add this class to a weapon and it'll prevent shooting when close to an obstacle (as defined by the ObstacleLayerMask)
CWeaponPreventShootingWhenCloseToWalls3D	Add this class to a weapon and it'll prevent shooting when close to an obstacle (as defined by the ObstacleLayerMask)
CWeaponSpriteSortingOrderThreshold	This class will modify the sprite associated with it's sorting order based on the current rotation of the weapon. Useful to get the weapon get in front or behind your character based on this angle on 2D weapons
CWeightedRandomTile	Weighted Random Tiles are tiles which randomly pick a sprite from a given list of sprites and a target location, and displays that sprite. The sprites can be weighted with a value to change its probability of appearing. The Sprite displayed for the Tile is randomized based on its location and will be fixed for that particular location
CWeightedSprite	A Sprite with a Weight value for randomization
CWelcomeWindow
▼NUnityEditor
►NAI
CNavMeshAssetManager
CNavMeshLinkEditor
CNavMeshModifierEditor
CNavMeshModifierVolumeEditor
CNavMeshSurfaceEditor
▼NUnityEngine
►NAI
CNavMeshLink
CNavMeshModifier
CNavMeshModifierVolume
CNavMeshSurface