This class handles the dropping of bombs by characters in the Explodudes demo scene More...

Inheritance diagram for MoreMountains.TopDownEngine.ExplodudesWeapon:

Public Types
enum	GridSpawnMethods { GridSpawnMethods.NoGrid, GridSpawnMethods.LastCell, GridSpawnMethods.NextCell, GridSpawnMethods.Closest }
	The possible ways to spawn a bomb on the grid : More...

Public Types inherited from MoreMountains.TopDownEngine.Weapon
enum	TriggerModes { TriggerModes.SemiAuto, TriggerModes.Auto }
	the possible use modes for the trigger (semi auto : the Player needs to release the trigger to fire again, auto : the Player can hold the trigger to fire repeatedly More...

enum	WeaponStates { WeaponStates.WeaponIdle, WeaponStates.WeaponStart, WeaponStates.WeaponDelayBeforeUse, WeaponStates.WeaponUse, WeaponStates.WeaponDelayBetweenUses, WeaponStates.WeaponStop, WeaponStates.WeaponReloadNeeded, WeaponStates.WeaponReloadStart, WeaponStates.WeaponReload, WeaponStates.WeaponReloadStop, WeaponStates.WeaponInterrupted }
	the possible states the weapon can be in More...

Public Member Functions
override void	Initialization ()
	On init we grab our pool and initialize our stuff More...

override void	ShootRequest ()
	When the weapon is used, we spawn a bomb More...

Public Member Functions inherited from MoreMountains.TopDownEngine.Weapon
virtual void	InitializeComboWeapons ()
	Initializes the combo weapon, if it's one More...

virtual void	SetOwner (Character newOwner, CharacterHandleWeapon handleWeapon)
	Sets the weapon's owner More...

virtual void	WeaponInputStart ()
	Called by input, turns the weapon on More...

virtual void	WeaponInputReleased ()
	Describes what happens when the weapon's input gets released More...

virtual void	TurnWeaponOn ()
	Describes what happens when the weapon starts More...

virtual void	CaseWeaponIdle ()
	If the weapon is idle, we reset the movement multiplier More...

virtual void	CaseWeaponStart ()
	When the weapon starts we switch to a delay or shoot based on our weapon's settings More...

virtual void	CaseWeaponDelayBeforeUse ()
	If we're in delay before use, we wait until our delay is passed and then request a shoot More...

virtual void	CaseWeaponUse ()
	On weapon use we use our weapon then switch to delay between uses More...

virtual void	CaseWeaponDelayBetweenUses ()
	When in delay between uses, we either turn our weapon off or make a shoot request More...

virtual void	CaseWeaponStop ()
	On weapon stop, we switch to idle More...

virtual void	CaseWeaponReloadNeeded ()
	If a reload is needed, we mention it and switch to idle More...

virtual void	CaseWeaponReloadStart ()
	on reload start, we reload the weapon and switch to reload More...

virtual void	CaseWeaponReload ()
	on reload, we reset our movement multiplier, and switch to reload stop once our reload delay has passed More...

virtual void	CaseWeaponReloadStop ()
	on reload stop, we swtich to idle and load our ammo More...

virtual void	CaseWeaponInterrupted ()
	on weapon interrupted, we turn our weapon off and switch back to idle More...

virtual void	Interrupt ()
	Call this method to interrupt the weapon More...

virtual IEnumerator	ShootRequestCo ()
	Determines whether or not the weapon can fire More...

virtual void	WeaponUse ()
	When the weapon is used, plays the corresponding sound More...

virtual void	WeaponInputStop ()
	Called by input, turns the weapon off if in auto mode More...

virtual void	TurnWeaponOff ()
	Turns the weapon off. More...

virtual void	ReloadNeeded ()
	Describes what happens when the weapon needs a reload More...

virtual void	InitiateReloadWeapon ()
	Initiates a reload More...

virtual void	FlipWeapon ()
	Flips the weapon. More...

virtual IEnumerator	WeaponDestruction ()
	Destroys the weapon More...

virtual void	ApplyOffset ()
	Applies the offset specified in the inspector More...

virtual void	InitializeAnimatorParameters ()
	Adds required animator parameters to the animator parameters list if they exist More...

virtual void	UpdateAnimator ()
	Override this to send parameters to the character's animator. This is called once per cycle, by the Character class, after Early, normal and Late process(). More...

Public Attributes
GridSpawnMethods	GridSpawnMethod
	the spawn method for this weapon More...

Vector3	BombOffset
	the offset to apply on spawn More...

int	MaximumAmountOfBombsAtOnce = 3
	the max amount of bombs a character can drop on screen at once More...

float	BombDelayBeforeExplosion = 3f
	the delay before the bomb explodes More...

int	RemainingBombs = 0
	the amount of bombs remaining More...

Public Attributes inherited from MoreMountains.TopDownEngine.Weapon
string	WeaponName
	the name of the weapon, only used for debugging More...

bool	WeaponCurrentlyActive = true
	whether or not the weapon is currently active More...

bool	InputAuthorized = true
	if this is true, this weapon will be able to read input (usually via the CharacterHandleWeapon ability), otherwise player input will be disabled More...

TriggerModes	TriggerMode = TriggerModes.Auto
	is this weapon on semi or full auto ? More...

float	DelayBeforeUse = 0f
	the delay before use, that will be applied for every shot More...

bool	DelayBeforeUseReleaseInterruption = true
	whether or not the delay before used can be interrupted by releasing the shoot button (if true, releasing the button will cancel the delayed shot) More...

float	TimeBetweenUses = 1f
	the time (in seconds) between two shots More...

bool	TimeBetweenUsesReleaseInterruption = true
	whether or not the time between uses can be interrupted by releasing the shoot button (if true, releasing the button will cancel the time between uses) More...

bool	UseBurstMode = false
	if this is true, the weapon will activate repeatedly for every shoot request More...

int	BurstLength = 3
	the amount of 'shots' in a burst sequence More...

float	BurstTimeBetweenShots = 0.1f
	the time between shots in a burst sequence (in seconds) More...

bool	MagazineBased = false
	whether or not the weapon is magazine based. If it's not, it'll just take its ammo inside a global pool More...

int	MagazineSize = 30
	the size of the magazine More...

bool	AutoReload
	if this is true, pressing the fire button when a reload is needed will reload the weapon. Otherwise you'll need to press the reload button More...

bool	NoInputReload = false
	if this is true, reload will automatically happen right after the last bullet is shot, without the need for input More...

float	ReloadTime = 2f
	the time it takes to reload the weapon More...

int	AmmoConsumedPerShot = 1
	the amount of ammo consumed everytime the weapon fires More...

bool	AutoDestroyWhenEmpty
	if this is set to true, the weapon will auto destroy when there's no ammo left More...

float	AutoDestroyWhenEmptyDelay = 1f
	the delay (in seconds) before weapon destruction if empty More...

bool	PreventReloadIfAmmoEmpty = false
	if this is true, the weapon won't try and reload if the ammo is empty, when using WeaponAmmo More...

int	CurrentAmmoLoaded = 0
	the current amount of ammo loaded inside the weapon More...

Vector3	WeaponAttachmentOffset = Vector3.zero
	an offset that will be applied to the weapon once attached to the center of the WeaponAttachment transform. More...

bool	FlipWeaponOnCharacterFlip = true
	should that weapon be flipped when the character flips? More...

Vector3	RightFacingFlipValue = new Vector3(1, 1, 1)
	the FlipValue will be used to multiply the model's transform's localscale on flip. Usually it's -1,1,1, but feel free to change it to suit your model's specs More...

Vector3	LeftFacingFlipValue = new Vector3(-1, 1, 1)
	the FlipValue will be used to multiply the model's transform's localscale on flip. Usually it's -1,1,1, but feel free to change it to suit your model's specs More...

Transform	WeaponUseTransform
	a transform to use as the spawn point for weapon use (if null, only offset will be considered, otherwise the transform without offset) More...

bool	WeaponShouldFlip = true
	if this is true, the weapon will flip to match the character's orientation More...

Transform	LeftHandHandle
	the transform to which the character's left hand should be attached to More...

Transform	RightHandHandle
	the transform to which the character's right hand should be attached to More...

bool	ModifyMovementWhileAttacking = false
	if this is true, a multiplier will be applied to movement while the weapon is active More...

float	MovementMultiplier = 0f
	the multiplier to apply to movement while attacking More...

bool	PreventAllMovementWhileInUse = false
	if this is true all movement will be prevented (even flip) while the weapon is active More...

bool	PreventAllAimWhileInUse = false
	if this is true all aim will be prevented while the weapon is active More...

float	RecoilForce = 0f
	the force to apply to push the character back when shooting - positive values will push the character back, negative values will launch it forward, turning that recoil into a thrust More...

List< Animator >	Animators
	the other animators (other than the Character's) that you want to update every time this weapon gets used More...

bool	PerformAnimatorSanityChecks = false
	If this is true, sanity checks will be performed to make sure animator parameters exist before updating them. Turning this to false will increase performance but will throw errors if you're trying to update non existing parameters. Make sure your animator has the required parameters. More...

bool	MirrorCharacterAnimatorParameters = false
	if this is true, the weapon's animator(s) will mirror the animation parameter of the owner character (that way your weapon's animator will be able to "know" if the character is walking, jumping, etc) More...

int	WeaponAnimationID = 0
	the ID of the weapon to pass to the animator More...

string	IdleAnimationParameter
	the name of the weapon's idle animation parameter : this will be true all the time except when the weapon is being used More...

string	StartAnimationParameter
	the name of the weapon's start animation parameter : true at the frame where the weapon starts being used More...

string	DelayBeforeUseAnimationParameter
	the name of the weapon's delay before use animation parameter : true when the weapon has been activated but hasn't been used yet More...

string	SingleUseAnimationParameter
	the name of the weapon's single use animation parameter : true at each frame the weapon activates (shoots) More...

string	UseAnimationParameter
	the name of the weapon's in use animation parameter : true at each frame the weapon has started firing but hasn't stopped yet More...

string	DelayBetweenUsesAnimationParameter
	the name of the weapon's delay between each use animation parameter : true when the weapon is in use More...

string	StopAnimationParameter
	the name of the weapon stop animation parameter : true after a shot and before the next one or the weapon's stop More...

string	ReloadStartAnimationParameter
	the name of the weapon reload start animation parameter More...

string	ReloadAnimationParameter
	the name of the weapon reload animation parameter More...

string	ReloadStopAnimationParameter
	the name of the weapon reload end animation parameter More...

string	WeaponAngleAnimationParameter
	the name of the weapon's angle animation parameter More...

string	WeaponAngleRelativeAnimationParameter
	the name of the weapon's angle animation parameter, adjusted so it's always relative to the direction the character is currently facing More...

string	EquippedAnimationParameter
	the name of the parameter to send to true as long as this weapon is equipped, used or not. While all the other parameters defined here are updated by the Weapon class itself, and passed to the weapon and character, this one will be updated by CharacterHandleWeapon only." More...

string	InterruptedAnimationParameter
	the name of the parameter to send to true when the weapon gets interrupted. While all the other parameters defined here are updated by the Weapon class itself, and passed to the weapon and character, this one will be updated by CharacterHandleWeapon only." More...

MMFeedbacks	WeaponStartMMFeedback
	the feedback to play when the weapon starts being used More...

MMFeedbacks	WeaponUsedMMFeedback
	the feedback to play while the weapon is in use More...

MMFeedbacks	WeaponUsedMMFeedbackAlt
	if set, this feedback will be used randomly instead of WeaponUsedMMFeedback More...

MMFeedbacks	WeaponStopMMFeedback
	the feedback to play when the weapon stops being used More...

MMFeedbacks	WeaponReloadMMFeedback
	the feedback to play when the weapon gets reloaded More...

MMFeedbacks	WeaponReloadNeededMMFeedback
	the feedback to play when the weapon gets reloaded More...

MMFeedbacks	WeaponReloadImpossibleMMFeedback
	the feedback to play when the weapon can't reload as there's no more ammo available. You'll need PreventReloadIfAmmoEmpty to be true for this to work More...

bool	InitializeOnStart = false
	If this is true, the weapon will initialize itself on start, otherwise it'll have to be init manually, usually by the CharacterHandleWeapon class. More...

bool	Interruptable = false
	whether or not this weapon can be interrupted More...

bool	Flipped
	if true, the weapon is flipped More...

MMStateMachine< WeaponStates >	WeaponState
	the weapon's state machine More...

Protected Member Functions
override void	Update ()
	On update we store our movement position More...

virtual void	SpawnBomb ()
	Spawns a bomb More...

virtual void	DetermineBombSpawnPosition ()
	Determines where the bomb should be spawned based on the inspector settings More...

virtual IEnumerator	AddOneRemainingBombCoroutine ()
	Adds back another bomb to use after it explodes More...

Protected Member Functions inherited from MoreMountains.TopDownEngine.Weapon
virtual void	Start ()
	On start we initialize our weapon More...

virtual void	InitializeFeedbacks ()

virtual void	LateUpdate ()
	On LateUpdate, processes the weapon state More...

virtual void	ProcessWeaponState ()
	Called every lastUpdate, processes the weapon's state machine More...

virtual void	ApplyRecoil ()
	Applies recoil if necessary More...

virtual void	ResetMovementMultiplier ()

virtual void	ReloadWeapon ()
	Reloads the weapon More...

virtual void	TriggerWeaponStartFeedback ()
	Plays the weapon's start sound More...

virtual void	TriggerWeaponUsedFeedback ()
	Plays the weapon's used sound More...

virtual void	TriggerWeaponStopFeedback ()
	Plays the weapon's stop sound More...

virtual void	TriggerWeaponReloadNeededFeedback ()
	Plays the weapon's reload needed sound More...

virtual void	TriggerWeaponReloadFeedback ()
	Plays the weapon's reload sound More...

virtual void	AddParametersToAnimator (Animator animator, HashSet< int > list)

virtual void	UpdateAnimator (Animator animator, HashSet< int > list)

Protected Attributes
MMSimpleObjectPooler	_objectPool

Vector3	_newSpawnWorldPosition

bool	_alreadyBombed = false

Vector3	_lastBombPosition

ExplodudesBomb	_bomb

WaitForSeconds	_addOneRemainingBomb

Vector3	_closestLast

Vector3	_closestNext

Vector3Int	_cellPosition

Vector3	_positionLastFrame

bool	_hasntMoved = false

Protected Attributes inherited from MoreMountains.TopDownEngine.Weapon
SpriteRenderer	_spriteRenderer

WeaponAim	_weaponAim

float	_movementMultiplierStorage = 1f

Animator	_ownerAnimator

WeaponPreventShooting	_weaponPreventShooting

float	_delayBeforeUseCounter = 0f

float	_delayBetweenUsesCounter = 0f

float	_reloadingCounter = 0f

bool	_triggerReleased = false

bool	_reloading = false

ComboWeapon	_comboWeapon

TopDownController	_controller

CharacterMovement	_characterMovement

Vector3	_weaponOffset

Vector3	_weaponAttachmentOffset

Transform	_weaponAttachment

List< HashSet< int > >	_animatorParameters

HashSet< int >	_ownerAnimatorParameters

bool	_controllerIs3D = false

int	_idleAnimationParameter

int	_startAnimationParameter

int	_delayBeforeUseAnimationParameter

int	_singleUseAnimationParameter

int	_useAnimationParameter

int	_delayBetweenUsesAnimationParameter

int	_stopAnimationParameter

int	_reloadStartAnimationParameter

int	_reloadAnimationParameter

int	_reloadStopAnimationParameter

int	_weaponAngleAnimationParameter

int	_weaponAngleRelativeAnimationParameter

int	_aliveAnimationParameter

int	_comboInProgressAnimationParameter

int	_equippedAnimationParameter

int	_interruptedAnimationParameter

float	_lastShootRequestAt = -float.MaxValue

float	_lastTurnWeaponOnAt = -float.MaxValue

bool	_movementSpeedMultiplierSet = false

Additional Inherited Members
Static Protected Attributes inherited from MoreMountains.TopDownEngine.Weapon
const string	_aliveAnimationParameterName = "Alive"

Properties inherited from MoreMountains.TopDownEngine.Weapon
virtual string	WeaponID `[get, set]`
	the name of the inventory item corresponding to this weapon. Automatically set (if needed) by InventoryEngineWeapon More...

virtual Character	Owner `[get, protected set]`
	the weapon's owner More...

virtual CharacterHandleWeapon	CharacterHandleWeapon `[get, set]`
	the weapon's owner's CharacterHandleWeapon component More...

virtual WeaponAmmo	WeaponAmmo `[get, protected set]`
	the WeaponAmmo component optionnally associated to this weapon More...

float	MovementMultiplierStorage `[get, set]`

bool	IsComboWeapon `[get, set]`

bool	IsAutoComboWeapon `[get, set]`

Detailed Description

This class handles the dropping of bombs by characters in the Explodudes demo scene

Member Enumeration Documentation

◆ GridSpawnMethods

enum MoreMountains.TopDownEngine.ExplodudesWeapon.GridSpawnMethods

strong

The possible ways to spawn a bomb on the grid :

no grid : at the world position of the weapon
last cell : the last cell the owner of the weapon passed by
next cell : the cell the owner of the weapon is moving to
closest : will pick the cell closest to the movement right now

Enumerator
NoGrid
LastCell
NextCell
Closest

Member Function Documentation

◆ AddOneRemainingBombCoroutine()

virtual IEnumerator MoreMountains.TopDownEngine.ExplodudesWeapon.AddOneRemainingBombCoroutine ( )

protectedvirtual

Adds back another bomb to use after it explodes

Returns

◆ DetermineBombSpawnPosition()

virtual void MoreMountains.TopDownEngine.ExplodudesWeapon.DetermineBombSpawnPosition ( )

protectedvirtual

Determines where the bomb should be spawned based on the inspector settings

◆ Initialization()

override void MoreMountains.TopDownEngine.ExplodudesWeapon.Initialization ( )

virtual

On init we grab our pool and initialize our stuff

Reimplemented from MoreMountains.TopDownEngine.Weapon.

◆ ShootRequest()

override void MoreMountains.TopDownEngine.ExplodudesWeapon.ShootRequest ( )

virtual

When the weapon is used, we spawn a bomb

Reimplemented from MoreMountains.TopDownEngine.Weapon.

◆ SpawnBomb()

virtual void MoreMountains.TopDownEngine.ExplodudesWeapon.SpawnBomb ( )

protectedvirtual

Spawns a bomb

◆ Update()

override void MoreMountains.TopDownEngine.ExplodudesWeapon.Update ( )

protectedvirtual

On update we store our movement position

Reimplemented from MoreMountains.TopDownEngine.Weapon.

Member Data Documentation

◆ _addOneRemainingBomb

WaitForSeconds MoreMountains.TopDownEngine.ExplodudesWeapon._addOneRemainingBomb

protected

◆ _alreadyBombed

bool MoreMountains.TopDownEngine.ExplodudesWeapon._alreadyBombed = false

protected

◆ _bomb

ExplodudesBomb MoreMountains.TopDownEngine.ExplodudesWeapon._bomb

protected

◆ _cellPosition

Vector3Int MoreMountains.TopDownEngine.ExplodudesWeapon._cellPosition

protected

◆ _closestLast

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon._closestLast

protected

◆ _closestNext

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon._closestNext

protected

◆ _hasntMoved

bool MoreMountains.TopDownEngine.ExplodudesWeapon._hasntMoved = false

protected

◆ _lastBombPosition

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon._lastBombPosition

protected

◆ _newSpawnWorldPosition

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon._newSpawnWorldPosition

protected

◆ _objectPool

MMSimpleObjectPooler MoreMountains.TopDownEngine.ExplodudesWeapon._objectPool

protected

◆ _positionLastFrame

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon._positionLastFrame

protected

◆ BombDelayBeforeExplosion

float MoreMountains.TopDownEngine.ExplodudesWeapon.BombDelayBeforeExplosion = 3f

the delay before the bomb explodes

◆ BombOffset

Vector3 MoreMountains.TopDownEngine.ExplodudesWeapon.BombOffset

the offset to apply on spawn

◆ GridSpawnMethod

GridSpawnMethods MoreMountains.TopDownEngine.ExplodudesWeapon.GridSpawnMethod

the spawn method for this weapon

◆ MaximumAmountOfBombsAtOnce

int MoreMountains.TopDownEngine.ExplodudesWeapon.MaximumAmountOfBombsAtOnce = 3

the max amount of bombs a character can drop on screen at once

◆ RemainingBombs

int MoreMountains.TopDownEngine.ExplodudesWeapon.RemainingBombs = 0

the amount of bombs remaining

The documentation for this class was generated from the following file:

F:/Github/Store/TopDownEngine/Assets/TopDownEngine/Demos/Explodudes/Scripts/ExplodudesWeapon.cs

Public Types

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ GridSpawnMethods

Member Function Documentation

◆ AddOneRemainingBombCoroutine()

◆ DetermineBombSpawnPosition()

◆ Initialization()

◆ ShootRequest()

◆ SpawnBomb()

◆ Update()

Member Data Documentation

◆ _addOneRemainingBomb

◆ _alreadyBombed

◆ _bomb

◆ _cellPosition

◆ _closestLast

◆ _closestNext

◆ _hasntMoved

◆ _lastBombPosition

◆ _newSpawnWorldPosition

◆ _objectPool

◆ _positionLastFrame

◆ BombDelayBeforeExplosion

◆ BombOffset

◆ GridSpawnMethod

◆ MaximumAmountOfBombsAtOnce

◆ RemainingBombs