Add this component to a character and it'll make your character fall down holes in 2D More...

Inheritance diagram for MoreMountains.TopDownEngine.CharacterFallDownHoles2D:

Public Member Functions
override void	ProcessAbility ()
	On process ability, we check for holes More...

override void	UpdateAnimator ()
	At the end of each cycle, we send our Running status to the character's animator More...

Public Member Functions inherited from MoreMountains.TopDownEngine.CharacterAbility
delegate void	AbilityEvent ()

virtual string	HelpBoxText ()
	This method is only used to display a helpbox text at the beginning of the ability's inspector. More...

virtual void	ForceInitialization ()
	Call this any time you want to force this ability to initialize (again) More...

virtual void	ResetInput ()
	Resets all input for this ability. Can be overridden for ability specific directives More...

virtual void	EarlyProcessAbility ()
	The first of the 3 passes you can have in your ability. Think of it as EarlyUpdate() if it existed More...

virtual void	LateProcessAbility ()
	The last of the 3 passes you can have in your ability. Think of it as LateUpdate() More...

virtual void	PermitAbility (bool abilityPermitted)
	Changes the status of the ability's permission More...

virtual void	Flip ()
	Override this to specify what should happen in this ability when the character flips More...

virtual void	ResetAbility ()
	Override this to reset this ability's parameters. It'll be automatically called when the character gets killed, in anticipation for its respawn. More...

virtual void	SetInputManager (InputManager newInputManager)
	Changes the reference to the input manager with the one set in parameters More...

virtual void	PlayAbilityStartSfx ()
	Plays the ability start sound effect More...

virtual void	PlayAbilityUsedSfx ()
	Plays the ability used sound effect More...

virtual void	StopAbilityUsedSfx ()
	Stops the ability used sound effect More...

virtual void	PlayAbilityStopSfx ()
	Plays the ability stop sound effect More...

virtual void	PlayAbilityStartFeedbacks ()
	Plays the ability start sound effect More...

virtual void	StopStartFeedbacks ()
	Stops the ability used sound effect More...

virtual void	PlayAbilityStopFeedbacks ()
	Plays the ability stop sound effect More...

Public Attributes
MMFeedbacks	FallingFeedback
	the feedback to play when falling More...

Public Attributes inherited from MoreMountains.TopDownEngine.CharacterAbility
AudioClip	AbilityStartSfx
	the sound fx to play when the ability starts More...

AudioClip	AbilityInProgressSfx
	the sound fx to play while the ability is running More...

AudioClip	AbilityStopSfx
	the sound fx to play when the ability stops More...

MMFeedbacks	AbilityStartFeedbacks
	the feedbacks to play when the ability starts More...

MMFeedbacks	AbilityStopFeedbacks
	the feedbacks to play when the ability stops More...

bool	AbilityPermitted = true
	if true, this ability can perform as usual, if not, it'll be ignored. You can use this to unlock abilities over time for example More...

CharacterStates.MovementStates[]	BlockingMovementStates
	an array containing all the blocking movement states. If the Character is in one of these states and tries to trigger this ability, it won't be permitted. Useful to prevent this ability from being used while Idle or Swimming, for example. More...

CharacterStates.CharacterConditions[]	BlockingConditionStates
	an array containing all the blocking condition states. If the Character is in one of these states and tries to trigger this ability, it won't be permitted. Useful to prevent this ability from being used while dead, for example. More...

Weapon.WeaponStates[]	BlockingWeaponStates
	an array containing all the blocking weapon states. If one of the character's weapons is in one of these states and yet the character tries to trigger this ability, it won't be permitted. Useful to prevent this ability from being used while attacking, for example. More...

AbilityEvent	OnAbilityStart

AbilityEvent	OnAbilityStop

Protected Member Functions
virtual void	CheckForHoles ()
	if we find a hole below our character, we kill our character More...

override void	InitializeAnimatorParameters ()
	Adds required animator parameters to the animator parameters list if they exist More...

Protected Member Functions inherited from MoreMountains.TopDownEngine.CharacterAbility
virtual void	Awake ()
	On awake we proceed to pre initializing our ability More...

virtual void	Start ()
	On Start(), we call the ability's intialization More...

virtual void	PreInitialization ()
	A method you can override to have an initialization before the actual initialization More...

virtual void	Initialization ()
	Gets and stores components for further use More...

virtual void	BindAnimator ()
	Binds the animator from the character and initializes the animator parameters More...

virtual void	InternalHandleInput ()
	Internal method to check if an input manager is present or not More...

virtual void	HandleInput ()
	Called at the very start of the ability's cycle, and intended to be overridden, looks for input and calls methods if conditions are met More...

virtual void	RegisterAnimatorParameter (string parameterName, AnimatorControllerParameterType parameterType, out int parameter)
	Registers a new animator parameter to the list More...

virtual void	OnRespawn ()
	Override this to describe what should happen to this ability when the character respawns More...

virtual void	OnDeath ()
	Override this to describe what should happen to this ability when the character respawns More...

virtual void	OnHit ()
	Override this to describe what should happen to this ability when the character takes a hit More...

virtual void	OnEnable ()
	On enable, we bind our respawn delegate More...

virtual void	OnDisable ()
	On disable, we unbind our respawn delegate More...

Protected Attributes
Collider2D	_holesTest

int	_fallingDownHoleAnimationParameter

Protected Attributes inherited from MoreMountains.TopDownEngine.CharacterAbility
Character	_character

TopDownController	_controller

TopDownController2D	_controller2D

TopDownController3D	_controller3D

GameObject	_model

Health	_health

CharacterMovement	_characterMovement

InputManager	_inputManager

Animator	_animator = null

CharacterStates	_state

SpriteRenderer	_spriteRenderer

MMStateMachine< CharacterStates.MovementStates >	_movement

MMStateMachine< CharacterStates.CharacterConditions >	_condition

AudioSource	_abilityInProgressSfx

bool	_abilityInitialized = false

float	_verticalInput

float	_horizontalInput

bool	_startFeedbackIsPlaying = false

List< CharacterHandleWeapon >	_handleWeaponList

Static Protected Attributes
const string	_fallingDownHoleAnimationParameterName = "FallingDownHole"

Additional Inherited Members
Properties inherited from MoreMountains.TopDownEngine.CharacterAbility
virtual bool	AbilityAuthorized `[get]`

virtual bool	AbilityInitialized `[get]`
	whether or not this ability has been initialized More...

Detailed Description

Add this component to a character and it'll make your character fall down holes in 2D

Member Function Documentation

◆ CheckForHoles()

virtual void MoreMountains.TopDownEngine.CharacterFallDownHoles2D.CheckForHoles ( )

protectedvirtual

if we find a hole below our character, we kill our character

◆ InitializeAnimatorParameters()

override void MoreMountains.TopDownEngine.CharacterFallDownHoles2D.InitializeAnimatorParameters ( )

protectedvirtual

Adds required animator parameters to the animator parameters list if they exist

Reimplemented from MoreMountains.TopDownEngine.CharacterAbility.

◆ ProcessAbility()

override void MoreMountains.TopDownEngine.CharacterFallDownHoles2D.ProcessAbility ( )

virtual

On process ability, we check for holes

Reimplemented from MoreMountains.TopDownEngine.CharacterAbility.

◆ UpdateAnimator()

override void MoreMountains.TopDownEngine.CharacterFallDownHoles2D.UpdateAnimator ( )

virtual

At the end of each cycle, we send our Running status to the character's animator

Reimplemented from MoreMountains.TopDownEngine.CharacterAbility.

Member Data Documentation

◆ _fallingDownHoleAnimationParameter

int MoreMountains.TopDownEngine.CharacterFallDownHoles2D._fallingDownHoleAnimationParameter

protected

◆ _fallingDownHoleAnimationParameterName

const string MoreMountains.TopDownEngine.CharacterFallDownHoles2D._fallingDownHoleAnimationParameterName = "FallingDownHole"

staticprotected

◆ _holesTest

Collider2D MoreMountains.TopDownEngine.CharacterFallDownHoles2D._holesTest

protected

◆ FallingFeedback

MMFeedbacks MoreMountains.TopDownEngine.CharacterFallDownHoles2D.FallingFeedback

the feedback to play when falling

The documentation for this class was generated from the following file:

F:/Github/Store/TopDownEngine/Assets/TopDownEngine/Common/Scripts/Characters/CharacterAbilities/CharacterFallDownHoles2D.cs

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Static Protected Attributes

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ CheckForHoles()

◆ InitializeAnimatorParameters()

◆ ProcessAbility()

◆ UpdateAnimator()

Member Data Documentation

◆ _fallingDownHoleAnimationParameter

◆ _fallingDownHoleAnimationParameterName

◆ _holesTest

◆ FallingFeedback