This feedback will trigger a MMBlink object, letting you blink something More...

Inheritance diagram for MoreMountains.Feedbacks.MMF_Blink:

Public Types
enum	BlinkModes { BlinkModes.Toggle, BlinkModes.Start, BlinkModes.Stop }
	the possible modes for this feedback, that correspond to MMBlink's public methods More...

Public Member Functions
override void	InitializeCustomAttributes ()
	Initializes our duration button More...

virtual void	GrabDurationFromBlink ()
	Grabs and stores the duration from our target blink component if one is set More...

Public Member Functions inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual float	ComputeIntensity (float intensity, Vector3 position)
	Computes the new intensity, taking into account constant intensity and potential randomness More...

virtual void	CacheRequiresSetup ()

virtual bool	EvaluateRequiresSetup ()
	Override this method to determine if a feedback requires setup More...

virtual void	SetFeedbackDuration (float newDuration)
	Use this method to change the duration of this feedback More...

virtual void	PreInitialization (MMF_Player owner, int index)
	Runs at Awake, lets you preinitialize your custom feedback before Initialization More...

virtual void	Initialization (MMF_Player owner, int index)
	Typically runs on Start, Initializes the feedback and its timing related variables More...

virtual void	SetIndexInFeedbacksList (int index)
	Lets you specify at what index this feedback is in the list - use carefully (or don't use at all) More...

virtual void	AutomaticShakerSetup ()
	Call this method (either directly or via the inspector button) to try and automatically setup this feedback's corresponding shaker in the scene More...

virtual void	ForceAutomateTargetAcquisition ()
	Lets you force target acquisition, outside of initialization where it usually occurs More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	SkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	Called when skipping to the end of MMF_Player, calls custom Skip on all feedbacks More...

virtual void	ForceInitialValue (Vector3 position, float feedbacksIntensity=1.0f)
	Forces the feedback to set its initial value (behavior will change from feedback to feedback, but for example, a Position feedback that moves a Transform from point A to B would automatically move the Transform to point A when ForceInitialState is called More...

virtual void	RestoreInitialValues ()
	Called when restoring the initial state of a player, calls custom Restore on all feedbacks More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	PlayerComplete ()
	This gets called by the MMF Player when all feedbacks have completed playing More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

virtual void	ComputeNewRandomDurationMultiplier ()
	Computes a new random duration multiplier More...

virtual void	ResetPlayCount ()
	Resets the play count of this feedback More...

virtual void	ComputeTotalDuration ()
	Computes the total duration of this feedback More...

virtual void	OnValidate ()
	Triggered when a change happens in the inspector More...

virtual void	OnAddFeedback ()
	Triggered when the feedback gets added to the player More...

virtual void	OnDestroy ()
	Triggered when that feedback gets destroyed More...

virtual void	OnDisable ()
	Triggered when the host MMF Player gets disabled More...

virtual void	OnDrawGizmosSelectedHandler ()
	Triggered when the host MMF Player gets selected, can be used to draw gizmos More...

Public Attributes
override bool	HasAutomatedTargetAcquisition => true

MMBlink	TargetBlink
	the target object to blink More...

List< MMBlink >	ExtraTargetBlinks
	an optional list of extra target objects to blink More...

BlinkModes	BlinkMode = BlinkModes.Toggle
	the selected mode for this feedback More...

float	Duration
	the duration of the blink. You can set it manually, or you can press the GrabDurationFromBlink button to automatically compute it. For performance reasons, this isn't updated unless you press the button, make sure you do so if you change the blink's duration. More...

MMF_Button	GrabDurationFromBlinkButton

Public Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
bool	Active = true
	whether or not this feedback is active More...

int	UniqueID

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

MMChannelModes	ChannelMode = MMChannelModes.Int

int	Channel = 0
	the ID of the channel on which this feedback will communicate More...

MMChannel	MMChannelDefinition = null

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

Color	DisplayColor = Color.black
	use this color to customize the background color of the feedback in the MMF_Player's list More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

MMFeedbackTargetAcquisition	AutomatedTargetAcquisition
	a set of settings letting you define automated target acquisition for this feedback, to (for example) automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

bool	RandomizeOutput = false
	if this is true, intensity will be multiplied by a random value on play, picked between RandomMultiplier.x and RandomMultiplier.y More...

Vector2	RandomMultiplier = new Vector2(0.8f, 1f)
	a random value (randomized between its x and y) by which to multiply the output of this feedback, if RandomizeOutput is true More...

bool	RandomizeDuration = false
	if this is true, this feedback's duration will be multiplied by a random value on play, picked between RandomDurationMultiplier.x and RandomDurationMultiplier.y More...

Vector2	RandomDurationMultiplier = new Vector2(0.5f, 2f)
	a random value (randomized between its x and y) by which to multiply the duration of this feedback, if RandomizeDuration is true More...

bool	UseRange = false
	if this is true, only shakers within the specified range will respond to this feedback More...

float	RangeDistance = 5f
	when in UseRange mode, only shakers within that distance will respond to this feedback More...

bool	UseRangeFalloff = false
	when in UseRange mode, whether or not to modify the shake intensity based on the RangeFallOff curve More...

AnimationCurve	RangeFalloff = new AnimationCurve(new Keyframe(0f, 1f), new Keyframe(1f, 0f))
	the animation curve to use to define falloff (on the x 0 represents the range center, 1 represents the max distance to it) More...

Vector2	RemapRangeFalloff = new Vector2(0f, 1f)
	the values to remap the falloff curve's y axis' 0 and 1 More...

MMF_Button	AutomaticShakerSetupButton
	a button used to attempt an auto shaker setup for this feedback, adding whatever shaker it requires to function to the scene More...

MMF_Player	Owner
	the Owner of the feedback, as defined when calling the Initialization method More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

virtual IEnumerator	Pause => null
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause => false
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	LooperStart => false
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	HasChannel => false
	if this is true, the Channel property will be displayed, otherwise it'll be hidden More...

virtual bool	HasAutomaticShakerSetup => false
	if this is true, this feedback will display an automatic shaker setup button More...

virtual bool	HasRandomness => false
	if this is true, the Randomness group will be displayed, otherwise it'll be hidden More...

virtual bool	CanForceInitialValue => false
	if this is true, this feedback implements ForceInitialState, otherwise calling that method will have no effect More...

virtual bool	ForceInitialValueDelayed => false
	if this is true, force initial value will happen over two frames More...

virtual bool	HasAutomatedTargetAcquisition => false
	whether or not this feedback can automatically grab the target on this game object, or a parent, a child, or on a reference holder More...

virtual bool	HasRange => false
	if this is true, the Range group will be displayed, otherwise it'll be hidden More...

virtual int	PlaysLeft => _playsLeft
	the total amount of plays this feedback has left More...

virtual bool	HasCustomInspectors => false

virtual bool	InCooldown
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual float	ComputedRandomMultiplier
	Returns the random multiplier to apply to this feedback's output More...

virtual bool	RequiresSetup => _requiresSetup
	A flag used to determine if a feedback has all it needs, or if it requires some extra setup. This flag will be used to display a warning icon in the inspector if the feedback is not ready to be played. More...

virtual string	RequiredTarget => _requiredTarget

virtual bool	DrawGroupInspectors => true
	if this is true, group inspectors will be displayed within this feedback More...

virtual bool	DisplayFullHeaderColor => false
	if this is true, the feedback will be displayed in the MMF Player's list with a full color background, as opposed to just a small line on the left More...

virtual string	RequiresSetupText => "This feedback requires some additional setup."
	defines the setup text that will be displayed on the feedback, should setup be required More...

virtual string	RequiredTargetText => ""
	the text used to describe the required target More...

virtual string	RequiredTargetTextExtra => ""
	the text used to describe the required target, if more info is needed More...

virtual float	FeedbackStartedAt => Application.isPlaying ? _lastPlayTimestamp : -1f

virtual bool	FeedbackPlaying
	whether or not this feedback is playing right now More...

virtual MMChannelData	ChannelData => _channelData.Set(ChannelMode, Channel, MMChannelDefinition)
	a ChannelData object, ready to pass to an event More...

Static Public Attributes
static bool	FeedbackTypeAuthorized = true
	a static bool used to disable all feedbacks of this type at once More...

Static Public Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
const string	_randomnessGroupName = "Feedback Randomness"

const string	_rangeGroupName = "Feedback Range"

const string	_automaticSetupGroupName = "Automatic Setup"

Protected Member Functions
override void	AutomateTargetAcquisition ()
	A method meant to be implemented per feedback letting you specify what happens (usually setting a target) More...

override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On Custom play, we trigger our MMBlink object More...

virtual void	HandleBlink (MMBlink target)
	Toggles, starts or stops blink on the target More...

override void	CustomRestoreInitialValues ()
	On restore, we restore our initial state More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual void	AutomateTargetAcquisitionInternal ()
	Performs automated target acquisition, if needed More...

virtual GameObject	FindAutomatedTargetGameObject ()

virtual T	FindAutomatedTarget< T > ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual void	TriggerCustomPlay (Vector3 position, float intensity)
	Triggers a custom play More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	TriggerRepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual IEnumerator	ForceInitialValueDelayedCo (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to delay the Stop when forcing initial values (used mostly with shaker based feedbacks) More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual IEnumerator	WaitFor (float delay)
	Internal method used to wait for a duration, on scaled or unscaled time More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual void	CustomInitialization (MMF_Player owner)
	This method describes all custom initialization processes the feedback requires, in addition to the main Initialization method More...

virtual void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets stopped More...

virtual void	CustomSkipToTheEnd (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets skipped to the end More...

virtual void	CustomPlayerComplete ()
	This method describes what happens when the player this feedback belongs to completes playing More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Properties
override float	FeedbackDuration `[get, set]`
	sets the inspector color for this feedback More...

Properties inherited from MoreMountains.Feedbacks.MMF_Feedback
virtual bool	ScriptDrivenPause `[get, set]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[get, set]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual MMF_ReferenceHolder	ForcedReferenceHolder `[get, set]`
	when in forced reference mode, this will contain the forced reference holder that will be used (usually set by itself) More...

virtual bool	IsPlaying `[get, set]`
	if this is true, this feedback is currently playing More...

virtual TimescaleModes	ComputedTimescaleMode `[get]`
	Returns the timescale mode to use in logic, taking into account the one set at the feedback level and the player level More...

virtual bool	InScaledTimescaleMode `[get]`
	returns true if this feedback is in Scaled timescale mode, false otherwise More...

virtual float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

virtual float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

virtual float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual bool	IsExpanded `[get, set]`

virtual string	RequiredChannelText `[get]`

virtual float	FeedbackDuration `[get, set]`

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

Additional Inherited Members
Protected Attributes inherited from MoreMountains.Feedbacks.MMF_Feedback
float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

bool	_requiresSetup = false

string	_requiredTarget = ""

float	_randomDurationMultiplier = 1f

int	_sequenceTrackID = 0

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

MMChannelData	_channelData

float	_totalDuration = 0f

int	_indexInOwnerFeedbackList = 0

string	_requiredTargetTextCached = "."

string	_requiredTargetTextCachedExtra = ""

float	_repeatOffset = 0f

Detailed Description

This feedback will trigger a MMBlink object, letting you blink something

Member Enumeration Documentation

◆ BlinkModes

enum MoreMountains.Feedbacks.MMF_Blink.BlinkModes

strong

the possible modes for this feedback, that correspond to MMBlink's public methods

Enumerator
Toggle
Start
Stop

Member Function Documentation

◆ AutomateTargetAcquisition()

override void MoreMountains.Feedbacks.MMF_Blink.AutomateTargetAcquisition ( )

protectedvirtual

A method meant to be implemented per feedback letting you specify what happens (usually setting a target)

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMF_Blink.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On Custom play, we trigger our MMBlink object

Parameters

position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMF_Feedback.

◆ CustomRestoreInitialValues()

override void MoreMountains.Feedbacks.MMF_Blink.CustomRestoreInitialValues ( )

protectedvirtual

On restore, we restore our initial state

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

◆ GrabDurationFromBlink()

virtual void MoreMountains.Feedbacks.MMF_Blink.GrabDurationFromBlink ( )

virtual

Grabs and stores the duration from our target blink component if one is set

◆ HandleBlink()

virtual void MoreMountains.Feedbacks.MMF_Blink.HandleBlink ( MMBlink target )

protectedvirtual

Toggles, starts or stops blink on the target

Parameters

target

◆ InitializeCustomAttributes()

override void MoreMountains.Feedbacks.MMF_Blink.InitializeCustomAttributes ( )

virtual

Initializes our duration button

Reimplemented from MoreMountains.Feedbacks.MMF_Feedback.

Member Data Documentation

◆ BlinkMode

BlinkModes MoreMountains.Feedbacks.MMF_Blink.BlinkMode = BlinkModes.Toggle

the selected mode for this feedback

◆ Duration

float MoreMountains.Feedbacks.MMF_Blink.Duration

the duration of the blink. You can set it manually, or you can press the GrabDurationFromBlink button to automatically compute it. For performance reasons, this isn't updated unless you press the button, make sure you do so if you change the blink's duration.

◆ ExtraTargetBlinks

List<MMBlink> MoreMountains.Feedbacks.MMF_Blink.ExtraTargetBlinks

an optional list of extra target objects to blink

◆ FeedbackTypeAuthorized

bool MoreMountains.Feedbacks.MMF_Blink.FeedbackTypeAuthorized = true

static

a static bool used to disable all feedbacks of this type at once

◆ GrabDurationFromBlinkButton

MMF_Button MoreMountains.Feedbacks.MMF_Blink.GrabDurationFromBlinkButton

◆ HasAutomatedTargetAcquisition

override bool MoreMountains.Feedbacks.MMF_Blink.HasAutomatedTargetAcquisition => true

◆ TargetBlink

MMBlink MoreMountains.Feedbacks.MMF_Blink.TargetBlink

the target object to blink

Property Documentation

◆ FeedbackDuration

override float MoreMountains.Feedbacks.MMF_Blink.FeedbackDuration

getset

sets the inspector color for this feedback

The documentation for this class was generated from the following file:

F:/Github/Store/TopDownEngine/Assets/TopDownEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacksForThirdParty/MMTools/Feedbacks/MMF_Blink.cs

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ BlinkModes

Member Function Documentation

◆ AutomateTargetAcquisition()

◆ CustomPlayFeedback()

◆ CustomRestoreInitialValues()

◆ GrabDurationFromBlink()

◆ HandleBlink()

◆ InitializeCustomAttributes()

Member Data Documentation

◆ BlinkMode

◆ Duration

◆ ExtraTargetBlinks

◆ FeedbackTypeAuthorized

◆ GrabDurationFromBlinkButton

◆ HasAutomatedTargetAcquisition

◆ TargetBlink

Property Documentation

◆ FeedbackDuration