This feedback will let you change the speed of a target animator, either once, or instantly and then reset it, or interpolate it over time More...

Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed:

Public Types
enum	Modes { Modes.Once, Modes.InstantThenReset, Modes.OverTime }
	sets the inspector color for this feedback More...

Public Member Functions
virtual float	GetTime ()

virtual float	GetDeltaTime ()

Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual MMChannelData	ChannelData (int channel)

virtual void	Initialization (GameObject owner)
	Initializes the feedback and its timing related variables More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

Public Attributes
Animator	BoundAnimator
	the animator whose parameters you want to update More...

Modes	Mode = Modes.Once
	whether to change the speed of the target animator once, instantly and reset it later, or have it change over time More...

float	NewSpeedMin = 0f
	the new minimum speed at which to set the animator - value will be randomized between min and max More...

float	NewSpeedMax = 0f
	the new maximum speed at which to set the animator - value will be randomized between min and max More...

float	Duration = 1f
	when in instant then reset or over time modes, the duration of the effect More...

AnimationCurve	Curve = new AnimationCurve(new Keyframe(0, 0f), new Keyframe(0.5f, 1f), new Keyframe(1, 0f))
	when in over time mode, the curve against which to evaluate the new speed More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool	Active = true
	whether or not this feedback is active More...

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

Static Public Attributes
static bool	FeedbackTypeAuthorized = true
	a static bool used to disable all feedbacks of this type at once More...

Protected Member Functions
override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On Play, checks if an animator is bound and triggers parameters More...

virtual IEnumerator	ChangeSpeedCo ()
	A coroutine used in ForDuration mode More...

virtual float	DetermineNewSpeed ()
	Determines the new speed for the target animator More...

override void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On stop, turns the bool parameter to false More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	OnEnable ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual void	CustomInitialization (GameObject owner)
	This method describes all custom initialization processes the feedback requires, in addition to the main Initialization method More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Protected Attributes
Coroutine	_coroutine

float	_initialSpeed

float	_startedAt

Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

int	_sequenceTrackID = 0

MMFeedbacks	_hostMMFeedbacks

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

bool	_isHostMMFeedbacksNotNull

MMChannelData	_channelData

Additional Inherited Members
Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject	Owner `[get, set]`
	the Owner of the feedback, as defined when calling the Initialization method More...

virtual IEnumerator	Pause `[get]`
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	ScriptDrivenPause `[get, set]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[get, set]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual bool	LooperStart `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	InCooldown `[get]`
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual bool	IsPlaying `[get, set]`
	if this is true, this feedback is currently playing More...

float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual float	FeedbackStartedAt `[get]`

virtual float	FeedbackDuration `[get, set]`

virtual bool	FeedbackPlaying `[get]`
	whether or not this feedback is playing right now More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

Detailed Description

This feedback will let you change the speed of a target animator, either once, or instantly and then reset it, or interpolate it over time

Member Enumeration Documentation

◆ Modes

enum MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.Modes

strong

sets the inspector color for this feedback

Enumerator
Once
InstantThenReset
OverTime

Member Function Documentation

◆ ChangeSpeedCo()

virtual IEnumerator MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.ChangeSpeedCo ( )

protectedvirtual

A coroutine used in ForDuration mode

Returns

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On Play, checks if an animator is bound and triggers parameters

Parameters

position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMFeedback.

◆ CustomStopFeedback()

override void MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.CustomStopFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On stop, turns the bool parameter to false

Parameters

position
feedbacksIntensity

Reimplemented from MoreMountains.Feedbacks.MMFeedback.

◆ DetermineNewSpeed()

virtual float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.DetermineNewSpeed ( )

protectedvirtual

Determines the new speed for the target animator

Returns

◆ GetDeltaTime()

virtual float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.GetDeltaTime ( )

virtual

◆ GetTime()

virtual float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.GetTime ( )

virtual

Member Data Documentation

◆ _coroutine

Coroutine MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed._coroutine

protected

◆ _initialSpeed

float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed._initialSpeed

protected

◆ _startedAt

float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed._startedAt

protected

◆ BoundAnimator

Animator MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.BoundAnimator

the animator whose parameters you want to update

◆ Curve

AnimationCurve MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.Curve = new AnimationCurve(new Keyframe(0, 0f), new Keyframe(0.5f, 1f), new Keyframe(1, 0f))

when in over time mode, the curve against which to evaluate the new speed

◆ Duration

float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.Duration = 1f

when in instant then reset or over time modes, the duration of the effect

◆ FeedbackTypeAuthorized

bool MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.FeedbackTypeAuthorized = true

static

a static bool used to disable all feedbacks of this type at once

◆ Mode

Modes MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.Mode = Modes.Once

whether to change the speed of the target animator once, instantly and reset it later, or have it change over time

◆ NewSpeedMax

float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.NewSpeedMax = 0f

the new maximum speed at which to set the animator - value will be randomized between min and max

◆ NewSpeedMin

float MoreMountains.Feedbacks.MMFeedbackAnimatorSpeed.NewSpeedMin = 0f

the new minimum speed at which to set the animator - value will be randomized between min and max

The documentation for this class was generated from the following file:

F:/Github/Store/TopDownEngine/Assets/TopDownEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacks/Feedbacks/Legacy/MMFeedbackAnimatorSpeed.cs

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Modes

Member Function Documentation

◆ ChangeSpeedCo()

◆ CustomPlayFeedback()

◆ CustomStopFeedback()

◆ DetermineNewSpeed()

◆ GetDeltaTime()

◆ GetTime()

Member Data Documentation

◆ _coroutine

◆ _initialSpeed

◆ _startedAt

◆ BoundAnimator

◆ Curve

◆ Duration

◆ FeedbackTypeAuthorized

◆ Mode

◆ NewSpeedMax

◆ NewSpeedMin